Building Filters
Weld gauge with vernier
- Manufacturer: Unknown
Weld gauge with vernier measurement of fillet welds; the seam elevation of butt welds can also be determined. The legs of the gauge are designed in such a way that opening angles on V and Y seams of 60°, 70°, 80°...
Münster, Germany
Münster, Germany
Münster, Germany
Adjustable Fillet Weld Gage Metric
- Manufacturer: Unknown
Adjustable Fillet Weld Gage Metric Measure Fillet Weld Measure Weld Throat Thickness
Münster, Germany
Münster, Germany
Münster, Germany
Münster, Germany
Mini Sub Socket Weld Gauge
- Manufacturer: Unknown
Mini Sub Socket Weld Gauge - check throat dimensions - check leg length
Münster, Germany
Münster, Germany
Bridgecam Gage
- Manufacturer: Unknown
Bridgecam Gage Angle of Preparation 0° to 60° Excess Weld Metal Depth of Undercut Depth of Pitting Fillet Weld Length
Münster, Germany
W.T.P.S Gauge with Calibration Block
- Manufacturer: Unknown
W.T.P.S Gauge with Calibration Block Undercut shall be no more than 0.01 inch (0.25 mm) deep when the weld is transverse to the pre. stress.
Münster, Germany
TIDE JWM 220
- Manufacturer: Tiede
Yoke magnetization for surface/weld seam testing, movable attachment poles, connected loads 230 V, 50/60 Hz, 2.4/1.7 A
Meinerzhagen, Germany
Scrata plates - 48 pieces -
- Manufacturer: Unknown
Scrata plates (set: 48 pieces) comparison plates for testing surface quality according to DIN EN 1370 The set consists of the following: - Surface rougness (1-5) - Surface inclusions (1-5) - Gas porosity (1-5) - ...
$3,519 USDMünster, Germany
Scrata plates - 48 pieces -
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$4,556 USDMünster, Germany