Test, Lab, Medical equipment » Materials Testing » Germany

Search By Manufacturer

Search By State

Search By Type

Building Filters

554

Used Materials Testing in Germany

  • BlueLine Model FL5000 Inspection Light

    BlueLine Model FL5000 Inspection Light

      Product information "BlueLine Model FL5000 Inspection Light" Model FL5000™ Dual Mode Inspection Light The BlueLine Model FL5000 is a revolutionary new flashlight for fluorescent NDT inspection. It works with exis...

      $760 USD
      Münster, Germany
    • Illumination device, Allen-Vanguard VIP 5

      Illumination device, Allen-Vanguard VIP 5

      • Manufacturer: Allen

      Product information "Illuminator, Allen-Vanguard VIP 5" Illuminators, manufactured by Allen-Vanguard - Small illuminator 3.0 and 14.0 mm series - Illuminator ( 3mm/ length 75 mm) & SP - 14 mm clip for mirror syst...

      $798 USD
      Münster, Germany
    • Illumination device, Allen-Vanguard VIP 3

      Illumination device, Allen-Vanguard VIP 3

      • Manufacturer: Allen

      Product information "Illuminator, Allen-Vanguard VIP 3" Illuminator, Allen-Vanguard VIP 3 - Small illuminator LP 3/75 (3.0 mm x 75 mm), - mirror clamp ( 3 mm/ length 75 mm), - 1 x spare lamp 3 W - Case with foam ...

      $549 USD
      Münster, Germany
    • portable hardness tester novotest T-UD3

      portable hardness tester novotest T-UD3

        Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with one probe (either UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D+15,...

        $3,391 USD
        Münster, Germany
      • Slip cross magnet 42 volts

        Slip cross magnet 42 volts

          Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...

          $1,163 USD
          Münster, Germany
        • JANKE & KUNKEL IKAMAG RH

          JANKE & KUNKEL IKAMAG RH

          • Manufacturer: Janke & Kunkel

          Heating plate, adjustable temperature and stirring frequency, 415 W, 230 V, 50 Hz, 20 - 2,000 rpm.

          Meinerzhagen, Germany
        • Drying apparatus (loss on ignition)

          Drying apparatus (loss on ignition)

          • Manufacturer: KLEES

          Radiant heater, 220 V, 50 Hz, 900 W, porcelain glow bowl (mortar) with pestle

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER SPIT

          +GF+ - GEORG FISCHER SPIT

          • Manufacturer: Georg Fischer

          Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER SPT

          +GF+ - GEORG FISCHER SPT

          • Manufacturer: Georg Fischer

          Electric motor type PMR 70/30 K, 20 W, 8,500 rpm, 220 V, 50 Hz, 0.25 A

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER PFH

          +GF+ - GEORG FISCHER PFH / GM-246

          • Manufacturer: Georg Fischer

          for direct reading of the surface hardness of compacted green sand molds

          Meinerzhagen, Germany
        • JANKE & KUNKEL MINI-MR

          JANKE & KUNKEL MINI-MR

          • Manufacturer: Janke & Kunkel

          Adjustable stirring frequency, 0 - 2,000 rpm, 1.5 W, 220 V, 50 Hz

          Meinerzhagen, Germany
        • RETSCH EM 2200 T

          RETSCH EM 2200 T

          • Manufacturer: Retsch

          Hotplate, adjustable temperature and stirring frequency, 230 V, 1850 rpm, 630 W

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER SPDU

          +GF+ - GEORG FISCHER SPDU

          • Manufacturer: Georg Fischer
          • Model: SPDU

          for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER SPDU

          +GF+ - GEORG FISCHER SPDU

          • Manufacturer: Georg Fischer
          • Model: SPDU

          for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd

          Meinerzhagen, Germany
        • +GF+ - GEORG FISCHER SPIT

          +GF+ - GEORG FISCHER SPIT

          • Manufacturer: Georg Fischer

          Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.

          Meinerzhagen, Germany
        2627282930

        Overview

        Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

        FAQ

        What should I consider when buying materials testing equipment?

        Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

        How do I ensure the materials testing equipment is shipped safely?

        Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

        What is the maintenance schedule for materials testing equipment?

        Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.