Test, Lab, Medical equipment » Materials Testing » Germany

Search By Manufacturer

Search By State

Search By Type

Building Filters

586

Used Materials Testing in Germany

  • Danatronics EHC-09 CW

    Danatronics EHC-09 CW

    • Manufacturer: Unknown

    Wall thickness gauge Danatronics EHC-09-CW (without data logger) Wall thickness range: 0.2 mm to 508.0 mm depending on the material, temperature and probe selection Sound velocity range: 0.508 to 18.696 mm/uS Tem...

    $2,984 USD
    Münster, Germany
  • Trusted Seller
    2021 Erweka BioDis RRT 10

    2021 Erweka BioDis RRT 10

    • Manufacturer: Erweka

    Erweka BioDis RRT 10 Dissolution Tester. 8 rows. 48 x 3 mL vials. 1 x 8 racks for 6 test stations for 50-300 mL vials. 6 x evaporation lids for 300 mL vials. 6 x USP 3 glass reciprocating cylinders with 35 x 112 ...

    $13,308 USD
    Burladingen, Germany
  • Pfinder 240 water-based black magnetic

    Pfinder 240 water-based black magnetic suspension

    • Manufacturer: Unknown

    Pfinder 240 black water-based magnet suspension for daylight testing; 400 ml aerosol can Due to the use of an alternative, non-flammable propellant, this 400 ml aerosol can contains more than 50% more test agent ...

    Münster, Germany
  • Slip cross magnet 42 volts

    Slip cross magnet 42 volts

    • Manufacturer: Unknown

    Helling cross magnet on rollers completely overhauled // - newly cast - ideal test device for simultaneous longitudinal and transverse defect testing! requires KWM 42 volt ballast

    $1,164 USD
    Münster, Germany
  • Trusted Seller
    Bähr DIL 803

    Bähr DIL 803

    • Manufacturer: Bähr

    Bähr Two-Sample Dilatometer DIL803. Maximum sample length 50 mm. Temperature range up to +1300°C. With additional interchangeable furnace. WinTA 7 software. The following illustrations and descriptions are model-...

    $6,358 USD
    Burladingen, Germany
  • Pfinder 150 (MT Fluores.)

    Pfinder 150 (MT Fluores.)

    • Manufacturer: Unknown

    Pfinder 150 fluorescent for testing under UV radiation Oil carrier; Aerosol can 500 ml, 1 unit = 12 cans

    Münster, Germany
  • BlueLine Model FL5000 Inspection Light

    BlueLine Model FL5000 Inspection Light

    • Manufacturer: Unknown

    The BlueLine Model FL5000 is a revolutionary new flashlight for fluorescent NDT inspection. It works with existing fluorescent particles and penetrants and does the job that you are used to doing with high powere...

    $760 USD
    Münster, Germany
  • LED UV Hand Held Light

    LED UV Hand Held Light Magnetic Particle Inspection Karl Deutsch 3815.101

    • Manufacturer: Unknown

    UV LED lamp for fluorescent penetrant and magnetic particle inspection Features and benefits: UV LED technology with long life time of the illuminant Runs with 5 high-end LEDs Immediately ready to use High UV int...

    $877 USD
    Münster, Germany
  • Trusted Seller
    PalmSens EmStat blue 3+

    PalmSens EmStat blue 3+

    • Manufacturer: PalmSens

    PalmSens Potentiostat EmStat3+ blue. Compact potentiostat for electrochemical measurements. Current range 1 nA to 100 mA with minimum accuracy of 1 pA. Complete set of cables and terminals. Software link (PSTrace...

    $1,377 USD
    Burladingen, Germany
  • Trusted Seller
    Pharmatest PTWS310 dissolutietesterPharmatest PTWS

    Pharmatest PTWS310 dissolutietesterPharmatest PTWS

    • Manufacturer: Pharmatest

    Description. Pharmatest PTWS310 Dissolution Tester

    $7,811 USD
    Burladingen, Germany
  • Trusted Seller
    DGRight RT-1405B Measuring table

    DGRight RT-1405B Measuring table

    • Manufacturer: DGRight

    Dongguan Right 2D Manual Measuring Table RT-1405B. For measuring components and profiles. Object table with X and Y displacement and 360° rotation. Continuous zoom. Automatic correction of aberrations. Measuring ...

    $7,120 USD
    Burladingen, Germany
  • Trusted Seller
    Sotax CP7

    Sotax CP7

    • Manufacturer: Sotax

    Sotax CP7 piston pump for dissolution testers. 7 channels. Flow rate 4-35 mL/min. LCD display. 230 V, 50/60 Hz, 250 W. The device is in very good condition. Technical Data

    $5,300 USD
    Burladingen, Germany
  • Trusted Seller
    DGRight RT-701B MFR /MVR tester

    DGRight RT-701B MFR /MVR tester

    • Manufacturer: DGRight

    Dongguan Right Melt Flow Rate Tester RT-701B For determining the melt flow rate of thermoplastics (MFR; units: g/10 min). For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plasti...

    $5,080 USD
    Burladingen, Germany
  • UW WALL THICKNESS MEASURING DEVICE

    UW WALL THICKNESS MEASURING DEVICE TRITEX 3000

    • Manufacturer: Unknown

    Above water display unit for TRITEX 3000Surface Display Upgrade for use with Multigauge 3000 with 100 meter cable on a roll 3 years factory guarantee

    $1,972 USD
    Münster, Germany
  • Angle probe 60 °, 2

    Angle probe 60 °, 2 MHz, 8 x 9 mm equiv. MET 60-2

    • Manufacturer: Unknown

    angle beam probe 60°, 2 MHz, 8 x 9 mm equiv. MWB 60-2 transducer size: 8 x 9 mm in box / carton packing data sheet and AVG diagram

    Münster, Germany
2021222324

Overview

Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

FAQ

What should I consider when buying materials testing equipment?

Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

How do I ensure the materials testing equipment is shipped safely?

Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

What is the maintenance schedule for materials testing equipment?

Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.