Building Filters
- Trusted Seller
FRITZ WERNER FP7V2 #0309623
- Manufacturer: Fritz Werner
Spindle face to table center: 9.5" TO 13.5" | Spindle speeds: (16) 12 TO 560 RPM | Spindle motors (each): 50 HP | Spindle taper: 60 ISO | Diameter of quill: 12" | Quill travel: 12-1/2" | Quill advance & retract:...
Toledo, OH - Trusted Seller
Werner Lehara 1- Meter Double Oven Line for Biscotti/Macaroons
- Manufacturer: Werner Lehara
Werner Lehara 1- Meter Double Oven Line for Biscotti/Macaroons - Werner Lehara 1-Meter Wire-cut/Depositor with assorted dies - 9 dies: (15) 1” round, (20) 1” round, (10) 2” long x 1/2” oval, (30) 1/2” round, (1...
Pennsylvania, USA - Trusted Seller
Hein-werner 20 Ton Hydraulic Jack - J-20
- Manufacturer: Hein
Name: Hydraulic Jack | Arrival date: 11-05-2025 | Dimensions l x w x h (inches): 48 x 36 x 12 | Capacity: 20 TON | Weight (lb.): 185 | Available quantity: 1
$100 USDEuclid, OH 
Werner & Pfleiderer Twin Screw Extruder
- Manufacturer: WP
One (1) Used Werner & Pfleiderer 58mm Twin Screw Extruder, twin screw compounder, continuous mixer, 16:1 L/D, Type Continua 58, Reliance Motor 25HP DC 1750RPM 500V, Gearbox rated for 40HP, co-rotating, 3 heating ...
Cleveland, OH- Trusted Seller
Werner Candy Depositors
- Manufacturer: Werner
Werner, automatic, dual counter rotating roll, dough sheeter / extruder with amount of product per hour – depending on materials and application. Equipped with 24" long x 13" wide x 8" deep product hopper, (2) 8...
Carol Stream, IL - Trusted Seller
WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/...
Hainesport, NJ - Trusted SellerAuction
Werner 7124-2
- Manufacturer: Werner
Fiber Ladder 📏17 Ft. 5" at highest standing level ✅Condition: Good ⚠️All goods have been available for inspection and are being sold on an “as is” and “where is” basis with no guarantee expressed or implied by th...
Albany, NYVisit Auction Website - Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ - Trusted Seller
Werner & Pfleiderer Mixer Paste Double Arm ¾ GAL
- Manufacturer: WP
Werner & Pfleider, Model 0.1 ft³ (¾ gallon) working capacity, jacketed, 304 stainless steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing ch...
Carol Stream, IL - Trusted Seller
Werner Pfleiderer Mixer Paste Double Arm ¾ GAL
- Manufacturer: WP
Werner & Pfleider, Model 0.1 ft³ (¾ gallon) working capacity, jacketed, 316 stainless steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing ch...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer ZDS-K28
- Manufacturer: WP
Used Werner Pfleiderer Twin Screw Extruder. Model ZDS-K28, Serial number 513991, Fab. no. 163805, built 1978. Co-rotating Screws, side by side. 28 mm screws. Screw length: 31" long(787.4mm) center of feed throat ...
Red Bank, NJ - Trusted Seller
Werner Lehara / Baker Perkins Bakery Equipment Depositors
- Manufacturer: Baker Perkins
Werner Lehara 18" wide depositor with number and pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 18" wide x ___" long Intralox product conveyor __...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P
- Manufacturer: WP
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer Mixer Paste Double Arm C/S JKTD TILT
- Manufacturer: WP
33 cu ft carbon steel, jacketed, double arm tilt mixer. Equipped with 2 piece hinged cover, Naben type mixing blades, jacketed body and hollow mixer blades for hot oil, or water cooling supply and (4) 1-1/4" jack...
Carol Stream, IL - Trusted Seller
Item No: 27059Werner Lehara 1-Meter Wire-Cut/Depositor With Assorted Dies -Biscotti
- Manufacturer: Werner Lehara
This Machine Can Be Used To Wire-Cut, Deposit Directly On The Steel Belt As Well As Create Continuous Ribbons Of Product To Be Cut Later By The Band Saw {Biscotti}. – (15) 1″ Round – (20) 1″ Round – (10) 2″ Long ...
Fritz Werner 8.101 Milling Machine
- Manufacturer: Fritz Werner
- Model: 8.101
Good condition Fritz Werner 8.101 Milling Machines. Located in Italy and other countries. Click request price for more information.
Italy