Used mitchell

Mitchell's 24" x 36" x 6.5" Black Granite Surface Plate #1203612

• Manufacturer: MITCHELL

Mitchell's 24" x 36" x 5" Black Granite Surface Plate #1203412

• Manufacturer: MITCHELL

36" x 24" MITCHELLS GRANITE SURFACE PLATE. #1099925

• Manufacturer: MITCHELL

Length: 36" | Width: 24" | Height: 5-1/4"

Robert Mitchell Co. 20 Gallon Stainless Steel Jacketed Reactor

• Manufacturer: Robert

ITEM #: 18631 Used Robert Mitchell Co. 20 Gallon Stainless Steel Jacketed Reactor National Board No: 380Interior chamber and heads of jacket are constructed of SB 575 N10276 (a Ni-Cr-Mo alloy with excellent corro...

Robert Mitchell Co. 20 Gallon Stainless Steel Jacketed Reactor

• Manufacturer: Robert

National Board No: 380 Interior chamber and heads of jacket are constructed of SB 575 N10276 (a Ni-Cr-Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres) Outer jacket is const...

1982 MITCHELL In-Line Hydraulic Push Pointer

• Manufacturer: MITCHELL

Equipped with: SPECIFICATIONS: MANUFACTURER: GEORGE A MITCHELL CO TYPE: IN-LINE HYDRAULIC PUSH POINTER YEAR OF MANUFACTURE: 1982 SERIAL No.: 378 MAXIMUM TUBE O.D.: 2" (50mm) MINIMUM TUBE O.D.: 1/2" (12.7mm) RATE...

MITCHELL SINGLE DIE TUBE PUSH POINTER

• Manufacturer: MITCHELL

1 1/4" (31.25mm) MITCHELL HYDRAULIC TUBE PUSH POINTER [12155] MACHINE# 12155 SINGLE DIE MODEL ............................ 10,620 LB @ 2250 PSI MAX. POINTING SPEED HYDRAULIC CLAMPING PUSH BUTTON CONTROLS SWIVEL B...

1982 MITCHELL PUSH POINTER

• Manufacturer: MITCHELL

For sale is a used 1982 Mitchell Push Pointer. As a 2 die hydraulic, it can handle tubes with 2" to 1/2" diameter, and a maximum capacity of 14,100 LB at 2250 PSI. Its speed capabilities are robust: 397 IPM advan...

MITCHELL PP-211 HYDRAULIC PUSH POINTER

• Manufacturer: MITCHELL

50,000 LBS MITCHELL 3-DIE HYDRULIC PUSH POINTER Stock # 14196 50,000 LBS MITCHELL 3-DIE PUSH POINTER Stock # 14196 MANUFACTURER - MITCHELL SERIAL NUMBER - PP-211 YEAR - 1975 RATED CAPACITY - 50,000 LBS @ 2000 PSI...

1978 MITCHELL 2 DIE HYDRA PUSH

• Manufacturer: MITCHELL

1 1/16" (27mm) MITCHELL HYDRA-PUSH 2-DIE HYD. COILED ROD PUSH POINTER (13114) MACHINE# 13114 Originally built for Nelson Steel & Wire. It was used to point coiled rod coming off of a horizontal payoff going to a ...

Mitchell 7" Diameter Manual Hand Sheet Press #39245

• Manufacturer: MITCHELL

Mitchell 7" Diameter Manual Hand Sheet Press Hp: 0

1981 1 1/4" (31.25mm) MITCHELL 2-DIE HYDRAULIC TUBE PUSH POINTER [12154]

• Manufacturer: MITCHELL

1 1/4" (31.25mm) MITCHELL 2-DIE HYDRAULIC TUBE PUSH POINTER [12154] MACHINE# 12154 TWO DIE MODEL ............................ 9,400 Lb @2000 psi Max. POINTING SPEED HYDRAULIC CYLINDER -MANUFACTURER..................

Singer 114-33 Sewing Machine w/ A.J. Mitchell Button Robot

• Manufacturer: SINGER

“Removed in working condition.” Singer 114-33 Sewing Machine w/ A.J. Mitchell Button Robot Singer 114-33 Sewing Machine w/ A.J. Mitchell Button Robot Shipping Shipping cost: Calculated Freight - Outside Carrier D...