Used Processing in Flanders, Belgium

Batch of various electrical equipment

Stacked in several boxes, lying on 2 pallets

Wolfcraft Manual Laminate Cutter

Wolfcraft Manual Laminate Cutter

1995 FISCHER+RÜCKLE FLA Glue spreader

• Manufacturer: Fischer

Automatic veneer pack edge glueing machine Veneer pack length: from 300 mm on Veneer pack width: 40 to 400 mm Veneer pack thickness: 10 to 80 mm Feed speed: 30 m/min Capacity, depending on pack length, ca. 3 to 4...

1987 JOSTING ZFS 2800 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2810 mm. Veneer pack thickness: 80 mm. Cutting width: 20 to 470 mm., 1 top knife, 1 bottom knife, simultaneous cutting Hydraulische pressure beam Power installed: 9 kW Preselection of 16 different...

ADAMIK CO. AP 300/130 Vacuum Press

Dimensions of the press: 3000 x 1300 mm. Useful dimensions: 2850 x 1150 mm. Standard vacuum pump: 12 m3/h, on request 25 m3/h or 40 m3/h Temperature: 50 - 60°C 3 mm thick membrane, 700% elasticity Medium heating ...

2022 ASPIR 300 Stand-alone dust extractor

• Manufacturer: aspir

- pressure filter - fan : 7,5 kw - flow: 6.000 m³/h - connection : 300 mm - 3 drainers 260 liter - automatic cleaning of the filter bags - automatic extinguishing system - with silencer

POLYBOIS RAV 48 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

POLYBOIS RAV 34 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

2-ZAK Stand-alone dust extractor

Diameter bags 500mm Diameter suction 120mm Motor 2,2kW Machine number: Year of construction:

1995 VENTOMATIC TEC/T/30 PK Stand-alone dust extractor

32 sleeves, each with diameter 30 cm Capacity approx. 10000 m3/h Built-on fan, motor 22 kW, inlet 400 mm. 8 x bag diam. 600 mm Machine number:

2005 HYMMEN TLT Glue spreader

• Manufacturer: Hymmen

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate...

2005 HYMMEN KRP 1300 Sandwich panel press

• Manufacturer: Hymmen

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plat...

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

HERAEUS Drying equipment for stain and lacquer

• Manufacturer: Heraeus - Hanau - Vötsch

dryer with IR lamps Cross bar transport Working width 1300 mm length of transport: 11m Machine number: Year of construction:

Drying equipment for stain and lacquer

Double Drying Rack 9 levels depth: 2 x 96 cm width: 90 cm height: 190 cm Machine number: Year of construction: Tension: