Used console

ADFORM LT CUT

• Manufacturer: Adform

Reference DMO : 1 - TECHNICAL CHARACTERISTICS OF THE CUTTING TABLE Plasma cutting machine model LT CUT Mechanically welded frame made of cold rolled steel guaranteeing the absence of distortion due to temperature...

BPR CPH - 60mm Shaft Diameter

• Manufacturer: BPR

NEW BPR Model CPH 60 – 70mm x 70mm x 8mm Angle Capacity Section Bending Rolls. Flats on Flat @ 120mm x 20mm, Flats on Edge @ 90mm x 15mm. Tubes 3" Gas to 850mm dia. 60mm dia. Shaft machine with 225mm dia. Formers...

BPR CPD - 80mm Shaft Diameter

• Manufacturer: BPR

NEW BPR Model CPD 80 – 80mm x 80mm x 10mm Angle Capacity Section Bending Rolls. Flats on Flat @ 130mm x 30mm, Flats on Edge @ 100mm x 15mm. Tubes 120mm x 2mm to 3000mm dia. 3" Gas to 1000mm dia. 80mm dia. Shaft m...

DDGJ-1.2-1500-ZY Spiral Duct Machine

• Manufacturer: Dezhou Dadong Machinery

air-power;Compaction of feed rolls adopts hydraulic power

HYPERTHERM Max pro / Semi HD

• Manufacturer: Hypertherm

Reference DMO : HYPERTHERM SEMI-HD MAXPRO® PLASMA GENERATOR This range of semi-HD plasma generator plasma generator is specially designed for tabletop cutting . The load factor is important, the consumables are s...

HYPERTHERM HPR / HD

• Manufacturer: Hypertherm

Reference DMO : HYPERTHERM PLASMA GENERATOR HPR XD This range of plasma generators is the most widespread in the metal industry, because of the quality of the cut of the parts carried out, almost without slag, li...

2008 FICEP HPM STEEL MAX 2000 x 6000 mm

• Manufacturer: Ficep

Plasma cutting table FICEP HPM STEEL MAX 2000 x 6000 mm Plasma cutting machine with drilling and tapping head - Technical data Dimensions and configuration Table dimensions Generator Drilling head Fume filtration...

GPM-3/300 Spiral duct machine (Gas pipe)

• Manufacturer: Dezhou Dadong Machinery

Diameter range: 350-1500mm | Material: galvanized steel:2.0-3.0mm, width 300mm | Decoiler: inner coil: 460~520 mm, max. outer coiler: 1400mm | Seam lock: located outside the ducts | Feeding speed: 0-20 m/min,adj...

Machinery

Description The body of the machine is made of cast iron, the gears are made of hard steel and the 3 driving shafts are made of steel, which are mounted on tapered bearings and controlled by a gear motor. The mac...

DDGJ-1.2-1800-ZF Spiral Duct Machine

• Manufacturer: Dezhou Dadong Machinery

Diameter range: 100-1800mm | Material: galvanized steel: 0.5-1.2mm,width 137mm | Decoiler: independent, inner coil: 460~520 mm | Seam lock: located outside the ducts | Feeding speed: 0-35m/min,adjustable | Cut t...

Pneumatic Hammer for Leveling 50

Our Pneumatic Hammer 50 is an essential tool that easily forms, stretches, shapes, and smooths metal. It's amazing how quickly you can shape panels, floors, dashboards, center consoles, fender flares, gas tanks, ...