Building Filters
- Trusted Seller
2009 FOLIANT Orpheus C 760A
- Manufacturer: Foliant
automatice laminating machine automatic loading automatic separation compresor
Huningue, France - Trusted Seller
2010 TECNOMAC Digit 70
- Manufacturer: Tecnomac
- Model: DIGIT 70
Max sheet size: 720x1020 mm | Min. sheet size: 210x210 mm | Mech. speed: 35m/min. | Hs code: 84439959 HS Codes Classification of Other | Brand: TECNOMAC | Country: Europe | Incoterm: EX Works | Under power: Yes ...
Huningue, France - Trusted Seller
2019 IST GmbH D-114-1LUV3-C70-CU-HD-ELC
- Manufacturer: IST GmbH
Brand: IST GmbH | Country: Europe | Incoterm: EX Works | Under power: NO | Still in production: No | Test possible: No | Complete and in working condition: Yes | In production: NO
Huningue, France - Trusted Seller
1997 TÜNKERS S 1450
- Manufacturer: Tünkers
Substrate Feeder automatic suction feeder＜＞Laminate Feeder by hand＜＞Pressing roll＜＞Delivery delivery on a table
Huningue, France - Trusted Seller
2016 VINFOIL Optima SF110GF
- Manufacturer: VINFOIL
VINFOIL OPTIMA® SF110 cold transfer system for offset printing machines in the size 1000-1100 mm＜＞Continuous foil drive while both cylinder gaps are facing each other by use of the special engineered Direct Foil ...
Huningue, France - Trusted Seller
2008 TECNOMAC Evolution 76
- Manufacturer: Tecnomac
- Model: EVOLUTION 76
Automatic Feeder＜＞ Electronic Overlap＜＞ Chromed roll heated by fluid＜＞ Pressure rubber roller with pneumatic movement＜＞ Motorized trimming device＜＞ Decurling device＜＞ Automatic separator＜＞ Automatic Stacker
Huningue, France - Trusted Seller
2023 KOMFI Delta 52
- Manufacturer: Komfi
- Model: DELTA 52
Automatic feeder with fixed lifting table＜＞ Single action Komfi feeding head＜＞ Vacuum pump＜＞ Automatic sheet overlap control＜＞ Mis-feeding detection＜＞ Laminating cylinder heated by 3-zone electro-resistance h...
Huningue, France - Trusted Seller
Huningue, France - Trusted Seller
1983 BILLHOEFER KM-1200
- Manufacturer: BILLHOEFER
Billhöfner combination machine for both water-based and thermal lamination.＜＞Cutting roller for cutting from larger to smaller formats.＜＞Minimum sheet size: 210mm/300mm＜＞Maximum sheet size: 1180mm/1600mm＜＞Product...
Huningue, France - Trusted Seller
1997 SAKURAI MS 102 A
- Manufacturer: Sakurai
SPE UV curing tunnel Max. sheet size: 750x1050 mm | Min sheet size: 356x650 mm | Drying system: U.V. | Coating system: Spot | Weight approx.: 4,300 kg | Hs code: 84439959 HS Codes Classification of Other | Dimens...
Huningue, France - Trusted Seller
2015 CVS Meccanica Fastlinear 165
- Manufacturer: CVS Meccanica
Vertically motorised head and brushless motor transmission;＜＞Automatic upper sheet feeder unit complete with: vacuum pump, automatic lift with brushless motor for raising/lowering the pallet, independent motorisa...
Huningue, France - Trusted Seller
2010 KOMFI Amiga 36
- Manufacturer: Komfi
Mod. Amiga 36A＜＞Standard equipment Max sheet size: 360x520 mm | Min. sheet size: 200x200 mm | Mech. speed: 15 m/min | Power consumption: 3.8 kVA; | Hs code: 84439959 HS Codes Classification of Other | Brand: KOMF...
Huningue, France - Trusted Seller
Huningue, France - Trusted Seller
2010 KOMFI Delta 52
- Manufacturer: Komfi
- Model: DELTA 52
Model Komfi Delta＜＞Automatic sheet feeding via Komfi designed feeding head＜＞Laminating cylinder heated by 3-zones electrical heating system＜＞Automatic sheet separation using using built-in perforator＜＞Application...
Huningue, France - Trusted Seller
2005 ECOSYSTEM Modulo 76
- Manufacturer: ECOSYSTEM
thermal film laminating unit＜＞heated pressure rollers＜＞stream feeder＜＞slitting device＜＞high pile delivery＜＞steel plate on feeder and delivery
Huningue, France