Used Tanks & Kettles in Bremen, Germany

900 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball

1000 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball

16000 liter heatable storage tank, Aisi304

remarks: Full pipe coil inside the tank (lower cylinder area) available

1000 liter pressure tank, Aisi 304

remarks: Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic)

400 liter conical tank, Aisi 316

remarks: Cone height appr. 400 mm; 3-legged frame, Aisi 304; 3 short pipes inside the tank

3600 liter insulated tank, Aisi 304

remarks: 4 support brackets, stainless steel; Manhole diameter approx. 460 mm (on 1 tank the toggle screw on the manhole cover is broken)

550 liter horizontal tank, Aisi 304

remarks: 1 manhole approx. 300 x 400 mm in the front bottom; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; cutting residues from 2 cut-off stainless steel parts on the outs...

13000 liter horizontal tank, Aisi 304

remarks: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent in the transition cylinder/front bottom (see photos)

7400 Liter rectangular tank, Aisi 304

• Manufacturer: Rieger

technical equipment: level indicator (without guarantee), butterfly valve remarks: 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024;...

2100 liter insulated tank, Aisi 304

notice: some residues of previous content, dents at the insulation jacket remarks: 4 supprt brackets, Fe; insulating jacket with smaller holes; outlet with lid diameter approx. 170 mm (in the lid 1 connection dia...

70800 liter storage tank, Aisi 304

• Manufacturer: Gross Apparatebau

remarks: manhole approx. 350 x 450 mm in the front bottom; one tank (9540-1) with a small dent under the wooden cradle, one tank (9540-2) without a nameplate, up to 4 additional identical tanks could be made avai...

48000 litres horizontal storage tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 320 x 420 mm in the front bottom; Cylinder wall thickness: 3-4; total length and total height according to drawing; Tanks have been professionally cleaned and overhauled by the manufact...

5200 liter rectangular tank, Aisi 304

• Manufacturer: Möschle

remarks: 1 manhole approx. 340 x 440 mm in the front bottom; tanks were professionally cleaned by a specialist company in 2024; walls curved outwards; Tanks with dents (see photos)

3950 liter pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ...

1100 liter insulated tank, Aisi 316

remarks: Frame, Fe; Tank open at the top with a loose lid segment (see photos)