Used solution in suisu

2009 Drying Solutions .

• Manufacturer: Drying Solutions

Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam. Approx conveying air feed 1,973 acfm at 266F to 288F. (Max inlet temp 680F). Last was running soybean meal In excellent operating condi...

Carbon Steel Gale Process Solutions 1P3018JTC Dryer-Porcupine - IPP# 46254

• Manufacturer: Bethlehem Corp

This one probably requires a lot of work 223 sq. ft. of heat area on the agitator 102 square feet on the jacket Original design speed 10 rpm Pitch angle of agitator is 1 degree Trough width is 30"length is 218"wi...

Carbon Steel Gale Process Solutions 1P1208JTC Dryer-Porcupine - IPP# 85892

• Manufacturer: Bethlehem Corp

UNUSED One agitator. Jacketed trough Completely fabricated and assembled except for the following: Johnson rotary joint, drive motor, drive gear and coupling No cover, agitator 35 sq.ft. trough 55 sq.ft.

Carbon Steel Gale Process Solutions 1P3012 Dryer-Porcupine - IPP# 212620

• Manufacturer: Bethlehem Corp

With drive and panel coils utilizing steam as the heat transfer medium agitator is ;142 sq. ft Trough is; 208 sq. ft The working volume is, 39.3 cu.ft It has a single shaft design supported by pillow block bearin...

Carbon Steel Gale Process Solutions 1P1203JT Dryer-Porcupine - IPP# 12784

• Manufacturer: Bethlehem Corp

porcupine processor Unit has 2.10 cu ft operating volume15 sq ft porcupine surface9 sq ft jacket surface Should be a candidate for scrap

Carbon Steel Gale Process Solutions 1P1203JTB Dryer-Porcupine - IPP# 12783

• Manufacturer: Bethlehem Corp

Heating medium is hot oil or steam Vessel rated 20 psig and full vacuum Working volume 2.10 cubic feet Agitator 15 square feet of heating area and 9 square feet on the jacket 3/60/220/440 volt. Requires motor

Carbon Steel Gale Process Solutions 1P3018UTC Dryer-Porcupine - IPP# 85676

Single agitator design. Trough is not jacketed Agitator is hardfaced and rated 150 psig @ 650 degree F vessel rated atmospheric @ 650 degree F Trough contains approximately 62 cu. ft. of processing space Complete...

Stainless Steel 316L Gale Process Solutions 1P1208JTC Dryer-Porcupine - IPP# 239456

• Manufacturer: Advance Thermal

12" diameter-ASME stamp for Jacket Only Link Belt HP rated 10

Stainless Steel 316 Gale Process Solutions 1P1207JTB Dryer-Porcupine - IPP# 73790

Single agitator Agitator 12" diameter and 7' long Heating medium hot oil or steam Vessel rated 15 psig @ 320 degree F Agitator has 30 square feet of heating area and with jacket added 15 square feet additional. W...

Stainless Steel 316 Gale Process Solutions 1P1203JTB Dryer-Porcupine - IPP# 40685

• Manufacturer: Bethlehem Corp

Heating medium is hot oil or steam Working volume 2.10 cubic feet Agitator 15 square feet of heating area and 9 square feet on the jacket Full vaccum Vessel rated 50 psig and full vacuum, jacket and agitator rate...

Stainless Steel 316 Gale Process Solutions 1P1203JTB Dryer-Porcupine - IPP# 78893

Material of construction 316SS (18% CR, 11% nickel) Working volume 1.89 cubic feet Heating medium is hot oil or steam. Full vaccum Agitator 12.4 square feet of heating area jacket 7.3 square feet Outboard bearing...

Stainless Steel 316 Gale Process Solutions 1P1203JTB Dryer-Porcupine - IPP# 206785

• Manufacturer: Bethlehem Corp

Agitator 12" diameter, 3' long. (18% Cr, 11% nickel) hot oil or steam and full vacuum Working volume 1.89 cubic feet Agitator 12.4 square feet of heating area and jacket 7.3 square feet. (requires motor and gear ...

Carbon Steel Gale Process Solutions 2Q3016UTC-R Dryer-Porcupine - IPP# 46596

• Manufacturer: Bethlehem Corp

30" dia x 16' long twin shaft porcupine processor Vaportight trough Both Rotors have a combined 392 sq ft of heating surface Approximately 140 cubic foot trough capacity Trough not jacketed Shaft speed 14 rpm UL ...

Stainless Steel 316 Gale Process Solutions 1P1203 Dryer-Porcupine - IPP# 207268

• Manufacturer: Bethlehem Corp

REBUILT 2.1 cu. ft. operating capacity Jacketed Porcupine Processor designed for batch operation manufactured by Bethlehem Foundry and Machine Company Shell is rated for MAWP 50 PSI Porcupine surface area is 15 s...

Stainless Steel 316 Gale Process Solutions 1P1207JTB Dryer-Porcupine - IPP# 78891

processor Single agitator design Agitator 12" diameter, 7' long Heating medium hot oil or steam Vessel rated 15 psig and full vacuum @ 320 degree F, jacket rated 75 psig @ 320 degree F, agitator rated 75 psig @ 3...