- Trusted Seller
Eight axis aluminum profile cutting and machining center
new
- Control: Hydro-pneumatic angle positioning, Servo controlled rotation
Aluminum extrusion processing center Aluminum extrusion profile cutting industrial three axis machine Eight axis aluminum profile cutting and machining center The CNC Profile Machining and Cutting Center (8 Axis)...
Toronto, Canada - Trusted Seller
DMG Mori 5-Axis Milling Machine (2018)
used
- Manufacturer: DMG Mori
- Model: DMU 100 P DUOBLOCK
- Spindle Taper: HSK-A 100
Model: DMU 100 P Duo Block | Working area - x/y/z axes: 39.4" x 49.2" x 39.4" | Table size (lxw): 43.3 "x 35.4" | Table speeds: 35 RPM | Max. table load: 4,900 lbs. | B-axis swiveling milling head swivel range: ...
Montreal, Canada 
Beaconsfield, Canada
1996 OKUMA MC-600H
used
- Manufacturer: Okuma
- Model: MC-600H
- Control: CNC (OSP7000)
in good condition, new upgraded controller screen, comes with three pallets and 2 tombstones, upgraded TSC Grundfos pump with filtration unit. 5000 RPM spindle (50 Taper) B Axis rotary table indexing in .00010" i...
MAKINO A88
used
- Manufacturer: Makino
- Model: A88
Equipped with 5th Axis capabilities this machine spent most of its life machining turbo prop engine components for Bell Helicopter in the Montreal area. This machine is extremely accurate, rigid and has been very...
MAKINO A55 Pro 3
used
- Manufacturer: Makino
- Model: A55 Pro
The iconic A55 known for its extreme rigidity and weight. Makino is one of the gold standards used by Aerospace companies around the world because of their high reliability and accuracy. Contact KovatechCNC at 51...
MAKINO A77
used
- Manufacturer: Makino
- Model: A77
- Control: CNC (Fanuc Makino Pro 3)
Extremely rigid and precise the Makino A77 is an ultra rigid workhorse that our client has maintained dutifully. This machine was part of cell with its big brother the A88 SN#009 at a facility machining turbo pro...
- Trusted Seller
Kitamura Mycenter-2XD Spark Changer CNC Vertical Machining Center (2018)
used
- Manufacturer: Kitamura
- Model: Mycenter 2XD
- Spindle Taper: CAT 40
- Control: Kitamura Aurmatik-Jr
Model: Mycenter-2XD Spark Changer | X-axis: 23.6" | Y-axis: 20.1" | Z-axis: 20.1" | Spindle motor (hp): 35 | Spindle speed (rpm): 12,000 | Spindle taper: CAT 40 | Tool magazine capacity: 40 ATC | Control: Kitamu...
Winnipeg, Canada - Trusted Seller
HAMAI MC-3VS Vertical Machine Center
used
- Manufacturer: Hamai
- Model: MC-3VS
Specifications 230 V 3 Phase
- Trusted Seller
2019 HAAS VF-2
used
- Manufacturer: Haas
- Model: VF-2
- Spindle Taper: 40 CT
Comes with tooling and accessories. Spindle taper: 40 CT | Cross travel (table): 16 " | Table size: 36" x 14" | Speed: 10,000 RPM | Cnc: Yes | Voltage: 220 volts | Phase: 3-phase | Amps: 70 amps | Made in: UNITED...
- Trusted Seller
FADAL VMC 4020 HT
used
- Manufacturer: Fadal
- Model: VMC-4020HT
Table size: 48" x 20" | Cnc: Yes | Run time: 17797 hrs | Voltage: 240 volts | Phase: 3-phase | Amps: 50 amps | Made in: UNITED STATES | Table load capacity: 3,600 Lbs. | X axis travel: 40" | Y axis travel: 20" |...
- Trusted Seller
1995 MAZAK VTC-16B
used
- Manufacturer: Mazak
- Model: VTC 16B
Table size: 44.8" x 16.1" | Voltage: 230/460 volts | Phase: 3-phase | X-travel: 44" | Y-travel: 16" | Z-travel: 20.08" | Table load capacity: 1760 lbs | Max tool diameter: 3.14" / 4.33" | Max tool length: 13.8" ...
- Trusted Seller
2006 FADAL VMC3016 HT
used
- Manufacturer: Fadal
- Model: VMC-3016HT
Hours: High Torque Motor Cross travel (table): 30 " | Table size: 39.5" x 16" | Voltage: 230 volts | Phase: 3-phase | Made in: UNITED STATES | Power on: 23,355 hours | Running: 9,644 hours | Number of axis: 3 | F...
- Trusted Seller
2014 HAAS VF-4
used
- Manufacturer: Haas
- Model: VF-4
Video 1 Video 2 Travels: 1000x1000x1000 ipm XYZ rapids Features: Inline Direct-Drive drive system Air / oil injection bearing lubrication Liquid cooled cooling Haas CNC control WIPSE Programmable coolant Chip aug...
Tip: Enter manufacturer, model or keyword
