Machine Tools » Upper Austria

Search By Category

Search By Manufacturer

Building Filters

1296

Used Machine Tools in Upper Austria, Austria

  • 1987 ROSENDAHL RA7061 Bobbin winding

    1987 ROSENDAHL RA7061 Bobbin winding machine

    • Manufacturer: ROSENDAHL

    Automatic winding machine in portal design Motorized bobbin lifting and lowering device 1492 operating hours Power cable was cut during disassembly No operating manual Transport dimensions 12 x 2.3 x 3 m

    Niederkappel, Austria
  • Bernardo Motorized guillotine shear MTB

    Bernardo Motorized guillotine shear MTB 1300 x 4 NC

    • Manufacturer: Bernardo
    • Maximum thickness: 4 mm
    • Shearing length: 1,300 mm

    Product Properties High operator safety through protective grid and photocells Double-edged top and bottom blades made of quality steel guarantee a clean and burr-free cutting Support arms on the front for easy h...

    $9,619 USD

    Get financing

    Est. $189/mo

    Linz, Austria
  • Speedomatic Super ½ automatic sliding

    Speedomatic Super ½ automatic sliding headstock lathe

    • Manufacturer: Speedomatic

    Sliding headstock lathe with bar tube Freight basis: in stock | Turning diameter: 12,7 mm | Number of revolutions: max 8600 rpm | Turning diameter over bed: / mm | Total power requirement: kW | Machine weight app...

    Niederkappel, Austria
  • BOLEY NB Lathe-conventional-electronic

    BOLEY NB Lathe-conventional-electronic

    • Manufacturer: BOLEY

    3 lathes, partly incomplete Control: conventional | Freight basis: in stock | Turning diameter: / mm | Turning length: / mm | Circumferential diameter over bed carriages: / mm | Total power requirement: / kW | Ma...

    Niederkappel, Austria
  • Bernardo Folding machine TB 1270

    Bernardo Folding machine TB 1270 Flex

    • Manufacturer: Bernardo
    • Model: TB 1270

    Product Properties The inserts in the upper, lower and bending beam result in a large number of bending possibilities Cassettes and special profiles with opposite bends are easy to carry with these models Univers...

    $4,422 USD
    Linz, Austria
  • OERLIKON SKM 1 spiral bevel

    OERLIKON SKM 1 spiral bevel gear cutting machine

    • Manufacturer: Oerlikon - Leybold
    • Model: SKM-1
    • Power requirement: 13 kW

    Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through hole for spindle pieces 78 mm. Plunge max 20 mm. Cutting feeds, infinitely variable 0.04 - 25 mm/min. Distance taper tip/workp...

    Niederkappel, Austria
  • Bernardo Motorized bordering machine MSM

    Bernardo Motorized bordering machine MSM 500 C

    • Manufacturer: Bernardo
    • Model: MSM 500

    Product Properties Powerful drive motor for machining of sheets up to 4,0 mm thickness 4 pair beading and bordering rolls included Mobile foot switch for right and left rotation Large throat for attaching deep-se...

    $5,232 USD

    Get financing

    Est. $103/mo

    Linz, Austria
  • Bernardo Folding machine B 1050

    Bernardo Folding machine B 1050 BOX

    • Manufacturer: Bernardo
    • Model: B 1050

    Product Properties Universal bending machine for plumbers and repair shops Simple pivoting movement of the bending beam by means of a bow handle Easy adjustment of the upper beam for efficient work High upper bea...

    $2,100 USD
    Linz, Austria
  • Bernardo Folding machine TB 1020

    Bernardo Folding machine TB 1020 Flex

    • Manufacturer: Bernardo
    • Model: TB 1020

    Product Properties The inserts in the upper, lower and bending beam result in a large number of bending possibilities Cassettes and special profiles with opposite bends are easy to carry with these models Univers...

    $3,930 USD
    Linz, Austria
  • Bernardo Folding machine TB 2070

    Bernardo Folding machine TB 2070 Flex

    • Manufacturer: Bernardo

    Product Properties The inserts in the upper, lower and bending beam result in a large number of bending possibilities Cassettes and special profiles with opposite bends are easy to carry with these models Univers...

    $7,179 USD

    Get financing

    Est. $141/mo

    Linz, Austria
  • Bernardo Motorized guillotine shear MTC

    Bernardo Motorized guillotine shear MTC 3100 x 4 NC

    • Manufacturer: Bernardo
    • Model: MTC 3100
    • Maximum thickness: 4 mm
    • Shearing length: 3,100 mm

    Cutting length: 3100 mm | Max. sheet metal thickness: 4 mm | Cutting angle: 1,4° | Strokes / min: 20 | Working height: 855 mm | Back gauge: 650 mm | Table width: 450 mm | Motor power: 7,5 kW | Length: 3945 mm | ...

    $19,589 USD

    Get financing

    Est. $385/mo

    Linz, Austria
  • 1979 FRÖMAG Rapida RAD 63/425

    1979 FRÖMAG Rapida RAD 63/425 Keyseating machine

    • Manufacturer: Fromag
    • Model: RAPIDA RAD 63425
    • Power requirement: 4 kW

    Automatic infeed 0.01 - 22mm Accessories: Dividing head Drawing knives size 32, 27, 25, 16, 12 mm 2x guide rods 32, 22 mm 2x feed rods

    Niederkappel, Austria
  • Bernardo Radial drilling machine RD

    Bernardo Radial drilling machine RD 700

    • Manufacturer: Bernardo
    • Column size: 150 mm

    The RD 700 Vario is a heavy radial drilling machine featuring stepless speed adjustment, automatic spindle feed and a digital speed display. For an extended range of applications, the machine also has a pivoting ...

    $5,455 USD

    Get financing

    Est. $107/mo

    Linz, Austria
  • Bernardo Motorized bordering machine MSM

    Bernardo Motorized bordering machine MSM 400 C

    • Manufacturer: Bernardo
    • Model: MSM 400

    Product Properties Powerful drive motor for machining of sheets up to 2,5 mm thickness 4 pair beading and bordering rolls included Standard with right-left rotation, controlled by foot pedal Large throat for atta...

    $4,364 USD
    Linz, Austria
  • 1974 MUBEA BF30-12 punching-shearing machine

    1974 MUBEA BF30-12 punching-shearing machine

    • Manufacturer: Mubea

    Control: / | Freight basis: in stock | Shear force: 30 t | Sheet width: / mm | Sheet length: mm | Sheet thickness: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

    Niederkappel, Austria
4142434445

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.