Machine Tools » Thuringia

Building Filters

135

Used controller in Thuringia, Germany

  • AMBOLD PEEV 40.3

    AMBOLD PEEV 40.3

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 3.5 kW

    - Ortlinghaus pneumatic clutch / brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch

    Schmölln, Germany
  • AMBOLD PEEV 55.3

    AMBOLD PEEV 55.3

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 4.5 kW

    - pneumatic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - mechan. Overload protection in the ram (break plate) - Control cabinet with touchscreen - foot switch

    Schmölln, Germany
  • 1978 MÜLLER CD 63.12.14

    1978 MÜLLER CD 63.12.14

    • Manufacturer: Muller
    • Power requirement: 22 kW

    - workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder

    Schmölln, Germany
  • 1984 MÜLLER CD 100.11.69

    1984 MÜLLER CD 100.11.69

    • Manufacturer: Muller
    • Power requirement: 30 kW

    - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...

    Schmölln, Germany
  • 1993 SMERAL S 160

    1993 SMERAL S 160

    • Manufacturer: Šmeral Brno
    • Model: S 160
    • Power requirement: 15 kW

    - Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...

    Schmölln, Germany
  • 1988 HELMERDING ERH 100 B

    1988 HELMERDING ERH 100 B

    • Manufacturer: HELMERDING

    Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...

    Schmölln, Germany
  • 1980 WEINGARTEN ARP 200

    1980 WEINGARTEN ARP 200

    • Manufacturer: Weingarten
    • Model: ARP 200
    • Power requirement: 15 kW

    The machine is checked in our warehouse and receives a current one Press test with protocol. The machine is safe for manual inlay work. - Operating instructions available On request, the machine can be used at an...

    Schmölln, Germany
  • 1969 ZEULENRODA PEDN 63/2

    1969 ZEULENRODA PEDN 63/2

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    - inclinable - ram is equipped with breaking plate safety device - table clamping plate - Ram adjustment by means of ratchet - Balluff cam indexing system Machine is not safe for manual insertion operation!

    Schmölln, Germany
  • 1989 KOHLER 150.2/150.1

    1989 KOHLER 150.2/150.1

    • Manufacturer: Kohler
    • Model: 15021501
    • Power requirement: 2 kW

    -Coil rewinding system with 3 single spools decoiler, type 150.2: - Spool width: 140 mm -Spreading: bolt spreading manually - Coil outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle...

    Schmölln, Germany
  • 2023 WEINGARTEN ARP 80

    2023 WEINGARTEN ARP 80

    • Manufacturer: Weingarten
    • Model: ARP 80
    • Power requirement: 7.5 kW

    Equipment: - with wheel storage - fixed table Machine has been / will be partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled over - New seals and hydraulic hoses - New main...

    Schmölln, Germany
  • MAXION UNIMAX 4

    MAXION UNIMAX 4

    • Manufacturer: Maxion
    • Model: UNIMAX 4
    • Drilling diameter: 45 mm

    Cycle programmable Complex workflows Great functionality Touchscreen Cycle programmable pillar drilling machine, also for complex work sequences, with programmable speeds and feeds. Simple as a conventional, func...

    Pößneck, Germany
  • MAXION BT 6 FREQUENZ

    MAXION BT 6 FREQUENZ

    • Manufacturer: Maxion

    Precise High speeds Drilling 0.5 - 6 mm Precision drilling machine with very high concentricity, especially for precision mechanics and electronics. Digital speed display, three-phase motor, 230 V mains connectio...

    Pößneck, Germany
  • 1990 HELMERDING ERH 75 B

    1990 HELMERDING ERH 75 B

    • Manufacturer: HELMERDING

    Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...

    Schmölln, Germany
  • 1965 WEINGARTEN XRR III sp

    1965 WEINGARTEN XRR III sp

    • Manufacturer: Weingarten
    • Model: XRR III SP

    - with additional brake - Tappet weight compensation - Motorized ram adjustment - Central grease lubrication (manual) - break plate - table platen - safe for manual inlay work - Operating instructions available

    Schmölln, Germany
  • 1986 JELSINGRAD BPA 15

    1986 JELSINGRAD BPA 15

    • Manufacturer: Jelsingrad

    Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm...

    Schmölln, Germany
56789

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.