Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

274

Used Machine Tools in Thuringia, Germany

  • BAD SALZUNGEN MHD 250/4

    BAD SALZUNGEN MHD 250/4

    • Manufacturer: ambold pressen- und maschinenbau

    unbraked reel with pressure roller new painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 250 mm | Coil weight: 2,5 t | Inner coil diameter: 450 - 530 mm | Sh...

    Schmölln, Germany
  • 1992 TOX-Pressotechnik PC 30.56

    1992 TOX-Pressotechnik PC 30.56

    • Manufacturer: TOX Pressotechnik
    • Stroke length: 200 mm
    • Throat depth: 250 mm

    Power pack press - The presses are equipped with a pneumohydraulic power cylinder. equipped. This divides the total stroke into an air-driven, and a hydraulic power stroke that starts automatically when the press...

    Schmölln, Germany
  • 1987 GSW SCHWABE LHM 80/650

    1987 GSW SCHWABE LHM 80/650

    • Manufacturer: Herman-Schwabe

    motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...

    Schmölln, Germany
  • 1977 SMERAL LENP 40 A

    1977 SMERAL LENP 40 A

    • Manufacturer: Šmeral Brno
    • Model: LENP 40 A

    - gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch

    Schmölln, Germany
  • 1978 MÜLLER CD 63.12.14

    1978 MÜLLER CD 63.12.14

    • Manufacturer: Muller
    • Power requirement: 22 kW

    - workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder

    Schmölln, Germany
  • KEPROMA AG DOD 40/100

    KEPROMA AG DOD 40/100

    • Manufacturer: ambold pressen- und maschinenbau

    - Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...

    Schmölln, Germany
  • 1986 JELSINGRAD BPA 15

    1986 JELSINGRAD BPA 15

    • Manufacturer: Jelsingrad

    Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm...

    Schmölln, Germany
  • 1977 DUNKES ESPZ 63/28

    1977 DUNKES ESPZ 63/28

    • Manufacturer: Dunkes
    • Model: ESPZ 6328

    - Draw cushion Press not safe for manual insertion work

    Schmölln, Germany
  • 1981 MÜLLER SZ 40.30.1

    1981 MÜLLER SZ 40.30.1

    • Manufacturer: Muller
    • Model: SZ 40301
    • Power requirement: 15 kW

    with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable

    Schmölln, Germany
  • no-image_en.png

    1971 WEINGARTEN ARS 160

    • Manufacturer: Weingarten
    • Model: ARS 160
    • Stroke length: 455 mm

    *with wheel transmission *with fixed work table *with enlarged table and ram surface *with enlarged throat *with passage in the body *with ram weight compensation The machine is currently being inspected and the ...

    Schmölln, Germany
  • CO2 laser machine MAZAK TX510

    CO2 laser machine MAZAK TX510 2,0kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically very good condition and can be visited anytime. Request a detailed offer if you are interested!

    Großrudestedt, Germany
  • CO2 laser machine MAZAK STX510

    CO2 laser machine MAZAK STX510 4,0kW MkII

    • Manufacturer: Mazak

    The used laser machine is in a technically perfect condition and can be inspected at any time. The 2D laser machine is in a very good condition and is offered with warranty . Included: Manuals Programming softwar...

    Großrudestedt, Germany
  • 1999 CO2 laser machine MAZAK

    1999 CO2 laser machine MAZAK NTX48 1,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can be visited at any time. Special features: CAD / CAM programming software Absaugungsanlage Balls table cooler Mazak L32B control encapsulated...

    Großrudestedt, Germany
  • CO2 laser machine MAZAK STX510

    CO2 laser machine MAZAK STX510 MkIII 2,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can currently still be viewed under power. The laser machine STX 510 MkIII 2.5 kW is in top condition with few operating hours. Table size: 3000...

    Großrudestedt, Germany
  • CO2 laser machine MAZAK STX510

    CO2 laser machine MAZAK STX510 MkIII 2,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can currently still be viewed under power. The laser machine STX 510 MkIII 2.5 kW is in top condition with few operating hours. Table size: 3000...

    Großrudestedt, Germany
1516171819

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.