Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

274

Used Machine Tools in Thuringia, Germany

  • 1990 HELMERDING ERH 75 B

    1990 HELMERDING ERH 75 B

    • Manufacturer: HELMERDING

    Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...

    Schmölln, Germany
  • ZEULENRODA PYE 10 S S

    ZEULENRODA PYE 10 S S

    • Manufacturer: Zeulenroda
    • Model: PYE 10
    • Power requirement: 8.5 kW

    - without clamping plate - only approved for work with closed tools

    Schmölln, Germany
  • ZEULENRODA PED 63/2

    ZEULENRODA PED 63/2

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...

    Schmölln, Germany
  • 1986 KAISER V 40 W/680

    1986 KAISER V 40 W/680

    • Manufacturer: Kaiser
    • Model: V 40 W/680
    • Power requirement: 8 kW

    - Tappet with 2 connecting rods - Unidor tool monitoring - Kaiser right gripper feed, band width 180 mm, feed length 150 mm, max. 2nd mm - Kaiser scrap scissors on the left - soundproof cladding - Eccentric shaft...

    Schmölln, Germany
  • 1993 SMERAL S 160

    1993 SMERAL S 160

    • Manufacturer: Šmeral Brno
    • Model: S 160
    • Power requirement: 15 kW

    - Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...

    Schmölln, Germany
  • 1980 EDELHOFF HZP 100

    1980 EDELHOFF HZP 100

    • Manufacturer: EDELHOFF
    • Power requirement: 11 kW

    with shock absorption and die cushion Machine without control cabinet

    Schmölln, Germany
  • 1982 ZEULENRODA PED 63/3

    1982 ZEULENRODA PED 63/3

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...

    Schmölln, Germany
  • ELMEA MSD 18 + MR

    ELMEA MSD 18 + MR 17S60M

    • Manufacturer: Elmea

    Double reel type MSD 18 (machine no. 18791): Strip width: 300 m coil weight: 400 kg Coil outer diameter: 1000 mm coil inner diameter: 240 - 680 mm Straightening machine type MR17S60M (machine no. 18591): Strip wi...

    Schmölln, Germany
  • AMBOLD JH25 – 200

    AMBOLD JH25 – 200

    • Manufacturer: ambold
    • Power requirement: 22 kW

    - pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...

    Schmölln, Germany
  • 2025 IWK PEKRD 125

    2025 IWK PEKRD 125

    • Manufacturer: ambold pressen- und maschinenbau
    • Stroke length: 400 mm
    • Power requirement: 16 kW

    – The machine has been partially overhauled – It has been completely disassembled and technically inspected – New seals – New pneumatic coupling – New seals in the compensating cylinder – New drive motor – New ba...

    Schmölln, Germany
  • 2023 WEINGARTEN ARP 80

    2023 WEINGARTEN ARP 80

    • Manufacturer: Weingarten
    • Model: ARP 80
    • Power requirement: 7.5 kW

    Equipment: - with wheel storage - fixed table Machine has been / will be partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled over - New seals and hydraulic hoses - New main...

    Schmölln, Germany
  • 1990 dirinler CD/PC 800 HK

    1990 dirinler CD/PC 800 HK

    • Manufacturer: Dirinler
    • Power requirement: 5.5 kW

    - Ram weight compensation Machine to be partially overhauled in our company in the coming year (disassembly, inspection, new paintwork, new wiring, new control cabinet)

    Schmölln, Germany
  • 1980 WEINGARTEN ARP 200

    1980 WEINGARTEN ARP 200

    • Manufacturer: Weingarten
    • Model: ARP 200
    • Power requirement: 15 kW

    The machine is checked in our warehouse and receives a current one Press test with protocol. The machine is safe for manual inlay work. - Operating instructions available On request, the machine can be used at an...

    Schmölln, Germany
  • AMBOLD PEEV 40.4

    AMBOLD PEEV 40.4

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 3.5 kW

    - hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Control cabinet with touchscreen - Height adjustable table - foot switch

    Schmölln, Germany
  • 1989 KOHLER 150.2/150.1

    1989 KOHLER 150.2/150.1

    • Manufacturer: Kohler
    • Model: 15021501
    • Power requirement: 2 kW

    -Coil rewinding system with 3 single spools decoiler, type 150.2: - Spool width: 140 mm -Spreading: bolt spreading manually - Coil outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle...

    Schmölln, Germany
1516171819

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.