Machine Tools » Saitama

Building Filters

50

Used processing machines in Saitama, Japan

  • 1997 Extrude Hone EX-800 (abrasive

    1997 Extrude Hone EX-800 (abrasive flow processing machine)

    • Manufacturer: Extrude-Hone

    Product name: Other general machine tools | Main specifications: Clamp stroke: minimum 34.5 mm, maximum 284.5 mm; Clamp cylinder spacing: 500 mm; Flange outer diameter: Φ180 mm; Clamp output: 11 tons; Media cyli...

    Tokigawa, Japan
  • 2003 OKK HP400 (horizontal machining

    2003 OKK HP400 (horizontal machining center)

    • Manufacturer: OKK

    Product name: Horizontal machining center | Main specifications: NC device: F-21iMB Table: □400 Maximum loading mass: 400 kg Pallet indexing angle: 0.001° Spindle speed: 12000 S(XYZ): 630×620×710 BT40 ATC40 Thro...

    Tokigawa, Japan
  • 2007 Koyo KVD450C (vertical double-head

    2007 Koyo KVD450C (vertical double-head surface grinder)

    • Manufacturer: Koyo

    Product name: Surface grinding machine | Main specifications: Maximum processing diameter 100m, Maximum processing width 50mm, Grinding wheel φ455 x 50 x (φ205), Grinding wheel rotation speed 1050rpm

    Tokigawa, Japan
  • 2008 Morioka General-purpose vendor [LD-412].

    2008 Morioka General-purpose vendor [LD-412].

    • Manufacturer: Morioka (ciudad)

    Product name: Other sheet metal vendors | Main specifications: Universal bending machine, processing plate thickness t2.5x1220mm, mouth opening 38mm, SN:007050378

    Tokigawa, Japan
  • 1999 ISEL BS-BH3000 (4 rolls)

    1999 ISEL BS-BH3000 (4 rolls)

    • Manufacturer: IJssel

    Product name: Roll Bender | Main specifications: Machine weight: 19.8t (including steel plate) Roll shaft effective width: 3000 Upper roll shaft diameter: φ400 Lower roll shaft diameter: φ240 Side roll shaft dia...

    Tokigawa, Japan
  • 2005 Roland DG / Roland

    2005 Roland DG / Roland DG Corporation MDX-40

    • Manufacturer: Roland
    • Model: MDX

    Specifications To inquire about this machine, please fill in the following information and click the [Send] button. Items marked with an asterisk (*) are required fields, so please be sure to fill them out comple...

    Kawaguchi, Japan
  • 2014 Amada Miyachi ML-7320CL

    2014 Amada Miyachi ML-7320CL

    • Manufacturer: Amada

    Product name: Laser processing machine | Main specifications: 3D head marking area 120mm Protection glass φ40×1t Single phase 100V Software: LMDraw6-3D Air cooled Fiber length 2m Oscillator output 20W

    Tokigawa, Japan
  • 2001 Seiwa NS-100CNC (NC hobbing

    2001 Seiwa NS-100CNC (NC hobbing machine)

    • Manufacturer: Seiwa

    M2.5 Max work dia:100mm Length:180mm Max hob dia x length:100x120mm

    Tokigawa, Japan
  • Miyachi Technos ML-4141B

    Miyachi Technos ML-4141B

    • Manufacturer: Technos

    ML-4141B Product name: Fusing machine accessories | Main specifications: ML-4141B

    Tokigawa, Japan
  • 2004 Kyoritsu Seiki

    2004 Kyoritsu Seiki

    • Manufacturer: Seiki

    Tool presetter Product name: Other Sheet Metal Machinery | Main specifications: Tool presetter for BT30,BT40

    Tokigawa, Japan
  • Kanefusa Finishing bits, double-pressed type

    Kanefusa Finishing bits, double-pressed type

    • Manufacturer: Kanefusa

    Bits for finishing in light cutting. The double-pressed type is effective in suppressing burrs on the top and bottom surfaces. Shaft diameter: φ12/φ16 Blade diameter: φ12/φ16 Overall length: 105/110mm Blade lengt...

    Kumagaya, Japan
  • Laxo LE400

    Laxo LE400

    • Manufacturer: Laxo

    Product name: Contour machine | Main specifications: Cutting capacity: Height 300 Depth 395 Cutting stroke: 330 Table dimensions: 600x600

    Tokigawa, Japan
  • 1991 Alps AX-3

    1991 Alps AX-3

    • Manufacturer: Alps

    3 m Product name: Other Sheet Metal Machinery | Main specifications: 3m

    Tokigawa, Japan
  • Marunaka MA-101

    Marunaka MA-101

    • Manufacturer: Marunaka

    This item is Used item. It comes with a hexagonal wrench and a spanner. The condition of the item is as shown in the pictures. If you can come to pick it up You are very welcome. You can check the actual item. Op...

    $1,403 USD
    Kumagaya, Japan
  • Dainippon Sumitomo DGM-400S

    Dainippon Sumitomo DGM-400S

    • Manufacturer: Dainippon Screen

    Designed so that the thickest material of up to 250 mm and the thinner of the assembly always get the same consistent condition! Simultaneous processing is possible even with materials of different thicknesses!

    Kumagaya, Japan
1234

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.