Machine Tools » Romania

Building Filters

37

Used boring machine in Romania

  • WOTAN 180 HORIZONTAL BORING AND

    WOTAN 180 HORIZONTAL BORING AND MILLING MACHINE

    • Manufacturer: Wotan

    The machine is on the original installation and is in working conditions, The machine was modernized in 2000 Specifications: Rotary Table:2500x3000mm Floor Plate:3000x6000mm Strokes: X-10000mm; Y=3000mm;W=10...

    Romania
  • INNOCENTI FLOOR TYPE HORIZONTAL BORING

    INNOCENTI FLOOR TYPE HORIZONTAL BORING AND MILLING MACHINE

    • Manufacturer: INNOCENTI, Italia

    The machine is installed in the original location, and it is in working conditions. The machine was refurbished 2000 Table dimensions: 1450x6000mm Strokes: X=4500mm; Y=2500mm; Z=1200mm Overall size: L=1350mm;...

    Romania
  • TITAN AFP200 HORIZONTAL BORING AND

    TITAN AFP200 HORIZONTAL BORING AND MILLING MACHINE

    • Manufacturer: TITAN Romania

    The machine is in the original installation, in good working condition.The machine is little used. Specifications Rotary table:2500mm x 2500mm Floor plate:3000mm x 7500mm Strokes: X=10000mm; Y=3000mm; Overal...

    Romania
  • Big-Bore Toolroom Lathe Haas TL-3B

    Big-Bore Toolroom Lathe Haas TL-3B

    • Manufacturer: Haas
    • Model: TL-3B
    • Spindle bore: 76 mm

    Big-Bore Toolroom Lathe Haas TL-3B yom 2010 Main technical data: Swing Over Front Apron: 30″ (762 mm) Swing Over Cross Slide: 18.5″ (470 mm) Distance Between Centers: 60″ (1524 mm) Max Cutting Diameter: 30″...

    Bucharest, Romania
  • 2010 Big-Bore Toolroom Lathe Haas

    2010 Big-Bore Toolroom Lathe Haas TL-3B

    • Manufacturer: Haas
    • Model: TL-3B
    • Spindle bore: 76 mm

    year of manufacture 2010 Main technical data: Pscai Texgpx Ho Ra Ijrb Machine is under power.

    Bucharest, Romania
  • TOS WHN 9B

    TOS WHN 9B

    • Manufacturer: TOS
    • Model: WHN 9
    • Spindle bore: 90 mm

    www.presstrade.ro

    Oradea, Romania
  • Vertical turning lathe MORANDO KL 12

    Vertical turning lathe MORANDO KL 12 CNC

    • Manufacturer: Morando
    • Model: KL12
    • Power requirement: 50 kW

    VTL MORANDO KL 12 CNC Fagor 8040 Located in ROMANIA

    Bucharest, Romania
  • CNC STANKO 1550 VTL

    CNC STANKO 1550 VTL

    • Manufacturer: Stanko
    • Model: 1550CNC

    CNC STANKO 1550 VTL table diameter 4500 mm max. turning diameter 5000 mm max. turning height 2500 mm table load 100 to machine weight aprox, 145 to

    Oradea, Romania
  • Used Floor Plates 4200x1500x350mm

    Used Floor Plates 4200x1500x350mm

    • Manufacturer: Unknown

    Used Floor Plates 4200x1500x350mm weight 5400kg/pc - 5pcs. available for sale. We guarantee you we deliver floor plates without cracks. Other floor plates we have on stock: - 25pcs 6000x2000x400mm - 10pcs 3500x17...

    Bucharest, Romania
  • Floor Plates 3500x1750x350mm

    Floor Plates 3500x1750x350mm

    • Manufacturer: Unknown

    Used Floor Plates 3500x1750x350mm weight 4ton/pc - 10pcs. available for sale. We guarantee you we deliver floor plates without cracks. Other floor plates we have on stock: - 25pcs 6000x2000x400mm - 11pcs 3500x200...

    Bucharest, Romania
  • LARGE HORIZONTAL BORING AND MILLING

    LARGE HORIZONTAL BORING AND MILLING MACHINE TITAN AFP 200 CNC WITH 5000MM VERTICAL TRAVEL

    • Manufacturer: TITAN -TMG , Romania

    AFP CNC Axes X. Column Saddle travel : 9000mm Y. Headstock -Saddle Vertical travel:5000mm Z. Boring Shaft travel:1200mm W. Quill travel1500mm W+Z .Cumulate travel:2700mm MRD_CNC Axes W2.Table travel: 3000m...

    $350,000 USD

    Get financing

    Est. $6,587/mo

    Bucharest, Romania
  • FOREST CN F 160 FLOOR

    FOREST CN F 160 FLOOR TYPE HORIZONTAL MILLING MACHINE

    • Manufacturer: Forest

    The machine is on the original instalation and it is in working conditions Specifications: Rotary Table:2500 mm x3500mm Floor plates:4500x135000mm Strokes:X=12000mm; Y=3500mm ;Z=1000mm overall size: L=20000m...

    Romania
  • CRANKSHAFT GRINDING MACHINE KARATSU 7000X1400

    CRANKSHAFT GRINDING MACHINE KARATSU 7000X1400

    • Manufacturer: KARATSU, JAPAN

    KARATSU RG-BAC KRANKSHAFT GRINDER Main Specification Distance between centers ……………………………. 7000mm Swing over bed , diameter ……………………….….. 1400mm Support diameter with chucks …………………..…….700mm Off set of chuc...

    Romania
  • WMW Heckert GFL 400 x

    WMW Heckert GFL 400 x 5000

    • Manufacturer: Heckert

    Max. diameter: 400 mm Height of centers: 200 mm Max. length: 5000 mm Max. thread profile: 12 Modul Milling head speeds: 55-80-118-170-280 RPM Main spindle bore: 80 mm Net weight of the machine: 6000 kg Acc...

    Oradea, Romania
  • Trusted Seller
    1999 Feeler FTC 20

    1999 Feeler FTC 20

    • Manufacturer: Feeler

    This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Idea...

    Romania
  • no-image_en.png

    Stanko 1550CNC Boring Mill

    • Manufacturer: Stanko
    • Model: 1550CNC

    Good condition Stanko 1550CNC Boring Mills manufactured in 2012. Located in Slovakia and other countries. Click request price for more information.

    Slovakia
123

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.