Used processing in Ohio, USA

15 Gal Royal Welding Kettle, S/S, 50#

• Manufacturer: Royal Machine

15 Gal Royal Welding Kettle, S/S, 50# Used 15 gallon Royal Welding mix kettle, stainless steel construction, approximately 15" diameter x 17" straight side, flat top, dish bottom, jacketed for 50 psi at 250 f, wi...

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"

• Manufacturer: Wabash
• Model: G302-CX

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"

• Manufacturer: Wabash
• Model: 30-1212-4STMBX

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...

Brown Trim Press, Model T-300

• Manufacturer: Brown
• Model: T-300

Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.

54 X 6.5 ARBORS X 20,000 LBS. TACI DRIVEN HEAD SLITTING LINE

• Manufacturer: Arrasate-Taci

EQUIPMENT SUMMARY Uncoiler: Entry Coil Car; Pit Type with Hydraulic Control Overarm Holddown with Power Feed-Up 24” Coil I.D. Peeler/Shear: Driven Pinch Rolls after Peeler Table Hydraulic Down Acting Shear...

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"

• Manufacturer: FH Maloney

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...

ONE USED BRANER 60 X 7 ARBORS X 40,000 LBS. DUAL HEAD SLITTING LINE

• Manufacturer: Braner

SPECIFICATIONS EQUIPMENT SUMMARY 3-Arm Entry Turnstile: Hydraulic Rotation Channeled Arms for “C” Hook Entry Braner Coil Car: L-Floor Type Self-Contained Hydraulics with 10 H.P. Motor ...

12 Ton Carver Press, Model C, 6" x 6"

• Manufacturer: Carver

12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.

1500 mm x 6 mm Used Sacma Slitting Line with Semi=Automatic Packaging Line, Coil Weight: 25 Tons, Strip Width: Max. 1550 mm, Strip Thickness: .5 mm to 6.0 mm Line Speed: 200 MPM

• Manufacturer: Sacma

Coming Soon!

54 X 6.5 ARBORS X 20,000 LBS. TACI DRIVEN HEAD SLITTING LINE

• Manufacturer: Arrasate-Taci

EQUIPMENT SUMMARY Uncoiler: Entry Coil Car; Pit Type with Hydraulic Control Overarm Holddown with Power Feed-Up 24” Coil I.D. Peeler/Shear: Driven Pinch Rolls after Peeler...

3M Kay Sealing System, Single Phase, Type 40800, S/N 50206 ($25 Loading fee will be added to buyer's

3M Kay Sealing System, Single Phase, Type 40800, S/N 50206 ($25 Loading fee will be added to buyer's invoice)

2100 mm x 12.7 mm Used Adda Fer Heavy Gauge Cut-to-Length Line

• Manufacturer: Adda

Coming Soon!