Machine Tools » Norway

Building Filters

231

Used Machine Tools in Norway

  • Trusted Seller
    Shizuoka Millmaster B-3V I Vertical

    Shizuoka Millmaster B-3V I Vertical Machining Center I 1989

    • Manufacturer: Shizuoka
    • Spindle taper: CAT 40

    Discover this used Shizuoka Millmaster B-3V (1989) vertical machining center located in Norway. Featuring an ample 890 x 457 mm working area, a Fanuc 0M-B control unit, 6000 RPM spindle speed, and a table load ca...

    $12,868 USD

    Get financing

    Est. $253/mo

    Norway
  • Trusted Seller
    2003 MH Wirth / Aker

    2003 MH Wirth / Aker MH / HMH Drill line Reel

    • Manufacturer: MHWirth

    Hydraulic Operated Spool, Drill Line Reel with capacity for 1524 m x 1-3/8" wire. In excellent condition. Used wire on pictures included. Hydraulic Drill Line Reel Spooler The Drilline Drum is a stand alone machi...

    Ågotnes, Norway
  • 2017 Igland 2690 Two-stage milling

    2017 Igland 2690 Two-stage milling machine

    • Manufacturer: Igland

    Nå har vi fått inn en meget flott Igland SB 2690 to-trinns snøfres for de krevende jobbene dette er maskinen med helt rå kapasitet! Informasjon: Arbeidsbredde 2.7m Viftediameter 90cm Innmaterskrue 95cm Toppskjær ...

    $17,355 USD

    Get financing

    Est. $341/mo

    Hattfjelldal, Norway
  • Trusted Seller
    Best Brands Sheet metal machines

    Best Brands Sheet metal machines in Norway

    • Manufacturer: Best Brands

    - Beyeler/Bystronic - COLGAR - Finn-/Prima-Power - Gasparini - LVD - Salvagnini - Schiavi - Trumpf  ..... see PDF Attach. Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com

    Oslo, Norway
  • Trusted Seller
    2021 PINACHO SE 325 X

    2021 PINACHO SE 325 X 2000 - S1

    • Manufacturer: Pinacho
    • Model: SE325

    Hauptspindel: Spindelbohrung (I.D.): 80 mm Spindelnase: ASA A2-8 Revolver: Automatischer 4-fach Revolver SQT-190-87-C Futter (vorne): 3-Backen-Universalfutter ASA8 Durchmesser: Ø 315 mm Drehzahl: 1250 U/m...

    Norway
  • Trusted Seller
    2006 Mazak Integrex 400 IV

    2006 Mazak Integrex 400 IV

    • Manufacturer: Mazak
    • Model: INTEGREX 400 IV

    This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm an...

    Norway
  • Trusted Seller
    2011 AMADA EMZ 3610 NT

    2011 AMADA EMZ 3610 NT

    • Manufacturer: Amada
    • Model: EMZ-3610NT

    This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with reposit...

    Norway
  • Trusted Seller
    Kimtech MAC 140-A1 XY-6020 I

    Kimtech MAC 140-A1 XY-6020 I Waterjet Cutting

    • Manufacturer: Kimtech

    We hereby offer this used Kimtech MAC 140-A1 XY-6020 waterjet cutting, located in Norway. This waterjet cutting machine features a large cutting area of 6000 x 2000 mm, allowing for the processing of sizable work...

    $19,887 USD

    Get financing

    Est. $391/mo

    Norway
  • Trusted Seller
    T.B.A. Flange, Blind, 36" -

    T.B.A. Flange, Blind, 36" - Titan

    • Manufacturer: T.B.A.

    Measurements of flange Documentation status: Not available | Flange, made of titanium, ø 36 a150 bl rf, astm b381 gr 2, excellent condition. weight: ca. 460 kg | Outer diameter: 117 cm | Thickness: 90 mm | Hole d...

    Ågotnes, Norway
  • Omega water jet Thruster

    Omega water jet Thruster

    • Manufacturer: Omega

    Complete water jet thruster in good condition. All documents available on further interest.

    Bergen, Norway
  • 2024 Bobcat PA7.5 compressor, 7

    2024 Bobcat PA7.5 compressor, 7 bar/5m³

    • Manufacturer: Bobcat

    Free air volume: 5m3/min Pressure: 6.8 bar Wet weight: 820kg Adjustable drag and brake Simple control panel that shows all the necessary information The engine is a 4 cylinder Yanmar (4TNV88C) with 48 hp Reliable...

    Sandnes, Norway
  • 2024 Bobcat PA7.5 compressor, 7

    2024 Bobcat PA7.5 compressor, 7 bar/5m³ with ECOmizer

    • Manufacturer: Bobcat

    Free air flow: 5m3/min Pressure: 6.8 bar Wet weight: 820kg Adjustable drag and brake Simple control panel that shows all necessary information The engine is a 4 cylinder Yanmar (4TNV88C) with 48hp Reliable stage ...

    Sandnes, Norway
  • 2024 Bobcat PA7.5 compressor, 7

    2024 Bobcat PA7.5 compressor, 7 bar/5m³

    • Manufacturer: Bobcat

    Free air volume: 5m3/min Pressure: 6.8 bar Wet weight: 820kg Adjustable drag and brake Simple control panel that shows all the necessary information The engine is a 4 cylinder Yanmar (4TNV88C) with 48 hp Reliable...

    Sandnes, Norway
  • 2024 Bobcat PA7.5 compressor, 7

    2024 Bobcat PA7.5 compressor, 7 bar/5m³

    • Manufacturer: Bobcat

    Free air volume: 5m3/min Pressure: 6.8 bar Wet weight: 820kg Adjustable drag and brake Simple control panel that shows all the necessary information The engine is a 4 cylinder Yanmar (4TNV88C) with 48 hp Reliable...

    Sandnes, Norway
  • 2024 Bobcat PA7.5 compressor, 7

    2024 Bobcat PA7.5 compressor, 7 bar/5m³

    • Manufacturer: Bobcat

    Free air volume: 5m3/min Pressure: 6.8 bar Wet weight: 820kg Adjustable drag and brake Simple control panel that shows all the necessary information The engine is a 4 cylinder Yanmar (4TNV88C) with 48 hp Reliable...

    Sandnes, Norway
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.