Machine Tools » Mie

Search By Category

Search By Manufacturer

Building Filters

19

Used dimension in Mie, Japan

  • 1977 Nagase SGW-4

    1977 Nagase SGW-4

    • Manufacturer: Nagase

    â—† Stroke (X, Y, Z): S: X470, Y270 —† rated voltage: AC200V | —† table dimensions: 450 x 200 | —† chuck dimensions (flat type): 450 x 150 | —† notch specifications: XY automatic | —† with or without dresser...

    Mie, Japan
  • 1985 Kuroda GS-CHA

    1985 Kuroda GS-CHA

    • Manufacturer: Kuroda
    • Model: GS-CHA

    â—† XY: Hydraulic feed Z: Automatic cutting —† rated voltage: AC200V | —† table dimensions: 550 × 200 | —† chuck dimensions (flat type): 500 × 200 × 90mm | —† no-load rotation speed: 1800m / min | —† whe...

    Mie, Japan
  • 1997 Okamoto PSG-52DX

    1997 Okamoto PSG-52DX

    • Manufacturer: Okamoto
    • Model: PSG-52

    â—† FX power supply, spindle rotating inverter, overhead dress, front and rear axis digital

    Mie, Japan
  • Nagase SGH-600

    Nagase SGH-600

    • Manufacturer: Nagase

    Motor 2.2 kW + 1.5 kW + 40 W; 9.8 A + 6.3 A + 0.23 A Electricity 220 V 3 Phase 0.005 Per Up Down Division 0.05 Per Cross Division

    Mie, Japan
  • Vertical Machining Center

    Vertical Machining Center

    • Manufacturer: OKUMA HOWAKIKAI

    ◆OH-OSP-HMi ◆XYZ:2050×850×750 ◆Table size:2200×850 ◆Workpiece allowable mass:2500kg ◆20-4000min-1 ◆ATC36 ◆BT50 ◆Machine dimensions:W5200×D4110×H3220mm ◆Weight:15T ※Program storage capacity:2560m ※Remote...

    Mie, Japan
  • 1971 Mizuguchi GU-650

    1971 Mizuguchi GU-650

    • Manufacturer: Mizuguchi

    â—† Rated voltage 200V —† no-load rotation speed: 1750min-1 | —† whetstone dimensions: outer diameter 355φ x width 75 x inner diameter 152.4φ

    Mie, Japan
  • 1992 Okuma & Howa Machinery

    1992 Okuma & Howa Machinery ACT-2SP-15H( Double-Spindle)

    • Manufacturer: Okuma

    ◆ FANUC18TT ◆ 40 ～ 4000rpm ※ With Gantry ※ No stocker, chip conveyor

    Mie, Japan
  • 2003 OKUMA MB-46VA

    2003 OKUMA MB-46VA

    • Manufacturer: Okuma
    • Model: MB46

    â—† OSP-E100M â—† ATC32 â—† BBT40 * Super NURBS * BIG PLUS * DNC-DT * Coolant tank * 19 tools * No tip conveyor

    Mie, Japan
  • 1997 OKUMA & HOWA MILLAC-511V

    1997 OKUMA & HOWA MILLAC-511V

    • Manufacturer: Okuma
    • Model: MILLAC

    â—† OH-OSP-MC â—† BT40 â—† ATC24 *No rigid tap * Helical cutting (only arcs within 360 degrees are possible) * No chip conveyor

    Mie, Japan
  • 1977 NICCO NSG-550B

    1977 NICCO NSG-550B

    • Manufacturer: NICCO

    â—† Rotation speed (50Hz) 2,800rpm / (60Hz) 3,400rpm â—† Grinding wheel: Diameter 180 x Thickness 6-32 x Hole diameter: 31.75mm

    Mie, Japan
  • 2008 MAZAK VCN-510C-â…¡

    2008 MAZAK VCN-510C-â…¡

    • Manufacturer: Mazak
    • Model: VCN 510C
    • Spindle taper: BT 40

    â—† MAZATROL MATRIX â—† ATC30 â—† MAS BT40 * No touch sensor, touch probe, tool length * No automatic workpiece measurement

    Mie, Japan
  • 2007 MAZAK VCN-410Aâ…¡

    2007 MAZAK VCN-410Aâ…¡

    • Manufacturer: Mazak
    • Model: VCN 410

    â—† MAZATROL MATRIX â—† ATC30 â—† MAS BT40 * No tool length * No automatic work measurement * With touch sensor * With through coolant * With interactive program * Simultaneous control of 3 axes is possible

    Mie, Japan
  • 1995 KENT KGS-410AHD

    1995 KENT KGS-410AHD

    • Manufacturer: Kent
    • Model: KGS-410AHD

    â—†With magnetic separator â—†full automatic —† table work surface: 1060 × 410 | —† table size: 3020 × 504 | —† grindable area: 1050 × 420 | —† wheel axis rotation speed (60hz): 1740rpm | —† wheel dimensi...

    Mie, Japan
  • 2012 Makino CNS3-WH

    2012 Makino CNS3-WH

    • Manufacturer: Makino

    â—† FANUC 31iA5 â—† 7 axes —† maximum tool diameter: φ12.7mm | —† maximum tool length: 100 mm | —† maximum twist angle: Right twist 60 ° | —† xyz: 320 x 320 x 290 mm | —† grindstone shaft taper: ISO # 30 m...

    Mie, Japan
  • 1968 Shigia Seiki GP-32C-90H

    1968 Shigia Seiki GP-32C-90H

    • Manufacturer: Seiki

    â—† Spindle speed: Belt 6 conversion (60Hz): 46 ~ 360rpm â—† No automatic cutting function â—†Minimum machining diameter 0 â—† Wheel mounting method: Wheel side: Metal Pulley side: Bearing

    Mie, Japan
12

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.