Used frames in Mexico

Door frame roll forming machine Mexico

A Door Frame Roll Forming Machine is specialized equipment designed to produce high-quality door frames efficiently and consistently. These machines are essential for the construction, building materials, and int...

ALFA MACCHINE FRAME ARMOR

• Manufacturer: Alfamacchine

PART # AMX-10014 - FRAME BUILDER - ALFA MACCHINE - MTRE-MITE - VN4 IN GOOD OPERATING CONDITION TABLE SIZE: 12" WIDE X 22" DEEP TABLE HEIGHT TO WORK ON: 37" FOR FRAME THICKNESSES: 0.197" MINIMUM TO 3.15" MAXIMUM F...

FRAME DRILL - 1 DRILL - RITTER

• Manufacturer: Ritter

PART: 12017 - FRAME DRILL - 1 DRILL - RITTER Used - In good condition Motor 1HP, 220V, 1 PH

AM-U-300 - FRAME ERECTOR - SEMI-AUTOMATIC

• Manufacturer: amxmachinery.com

PART: 2AM-U-300 - FRAME ERECTOR - SEMI-AUTOMATIC NEW WITH WARRANTY The U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for ...

AM-U-200 - FRAME ASSEMBLY MACHINE - MANUAL

• Manufacturer: amxmachinery.com

PART: 2AM-U-200 - FRAME ASSEMBLY MACHINE - MANUAL NEW WITH WARRANTY The U-200 is an entry-level frame assembly machine for any small retail operation. As a fully manual machine, it requires no compressed air or e...

FRAME CONNECTION DRILL - 2 DRILLED HOLES

• Manufacturer: Union

PART # 2RT-R220T - FRAME JOINTING DRILL - 2 DRILLS 1.5 HP Spindle Drive Motor, TEFC 1" Spindle Centers Manual Controls, 110 V, TEFC Foot Actuated Boring Cycle Tooling included 14 Degree Double Spindle 1" Spindle ...

FRAME CONNECTION DRILL - 1 DRILL HOLE

• Manufacturer: Union

PART # 2RT-R200T - UNION FRAME DRILL - 1 DRILL 1.5 HP Spindle Drive Motor, TEFC Manual Controls, 1-Phase, 110 V, 60 Hz Foot Actuated Boring Cycle 14 Degree Single Spindle 6,100 RPM Spindle Speed Ball Bearing Coll...

AM-U-500 - PROGRAMMABLE FRAME ERECTOR - 1 CHANNEL

• Manufacturer: amxmachinery.com

PART: 2AM-U-500 - PROGRAMMABLE FRAME JOINER - 1 CHANNEL Our U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the sa...

TRQ-763 OBI TYPE DIE CUTTING PRESS, 5 TON CAPACITY, WHITNEY JENSEN FRAME

• Manufacturer: Jensen

Whitney Jensen (U.S.A.) OBI type die cutting press, 5 Ton capacity, 6" x 12" table, 3" x 3" ram, 3/8" stroke, 6" S.H., mechanical clutch, 1/2 HP motor.

Door Frame Roll Forming Machine In Mexico

Door Channel Roll Forming Machine Steel Iron Door Frame Transmission Method Chains Name Door Frame Making Machine Roller Material 45# Steel Shaft Material 45# Steel Shaft Diameter 60mm PLC Delta Drive Mode by Cha...

FRAME ASSEMBLER - ALFA MACCHINE - MTRE-MITE - VN4

• Manufacturer: Alfamacchine

PART # AMX-10014 - FRAME BUILDER - ALFA MACCHINE - MTRE-MITE - VN4 USED - GOOD CONDITION TABLE SIZE: 12" WIDE X 22" DEEP TABLE HEIGHT TO WORK ON: 37" FOR FRAME THICKNESS: 0.197" MIN. TO 3.15" MAX. FOR WIDE FRAMES...

TRQ-855 HYDRAULIC PRESS TYPE H MODEL HPV100, CAPACITY 110 TON, WANZKE FRAME

WANZKE (Germany) Hydraulic press type H model HPV100, capacity 110 Ton, table 21" x 27.5", ram 21" x 26", 6" stroke, max. opening 18", air cushion 10 ton, motor 18.5 Kw, s/n. EF97

TRQ-734 OBI DIE CUTTING PRESS TYPE OBI NO.4, CAPACITY 45 TON, STEEL FRAME

Steel (U.S.A.) OBI No.4 type die press, capacity 45 Ton, table 19" x 28", ram 7" x 12", 4" stroke, 9" S.H., 3" adjustment, mechanical clutch, motor 5 HP, s/n. 19392

TRQ-885 OBI DIE CUTTING PRESS TYPE OBI NO.65S, 65 TON CAPACITY, WALSH FRAME

WALSH (U.S.A.) OBI No.65S type die cutting press, 65 Ton capacity, 19" x 32.5" table, 12" x 14" ram, 5" stroke, 2" adjustment, 17" S.H., mechanical clutch, double ratio, 7.5HP engine, s/n. 8998