Used adjustable depth stop in Mexico

INVERTED PIN ROUTER - CR ONSRUD 36210

• Manufacturer: C.R. Onsrud

PART: 12127 - ROUTER PIN REVERSED - CR ONSRUD 36210 USED - IN GOOD CONDITION - CLEANED AND SERVICED 230V, 3 PH, 60 CY 10 HP motor, belt driven to spindle 25,000 RPM spindle speed Pneumatic spindle and guide pin m...

INVERTED PIN ROUTER - CR ONSRUD 3025

• Manufacturer: C.R. Onsrud

PART: 12126 - REVERSE PIN ROUTER - CR ONSRUD 3025 USED - IN GOOD CONDITION - CLEANED AND SERVICED 230V, 3 PH, 60 CY 5 HP motor, belt driven to spindle 20,000 RPM spindle speed Pneumatic spindle and guide pin move...

12" METAL CUTTER

• Manufacturer: amxmachinery.com

PART: 2MT-CM01 - METAL CUTTING MACHINE - CAPACITY 12" LONG New with warranty High quality cutter for decorative clean cuts throughout the entire 12" long cut. Cutter designed on the same principle as industrial c...

PEDESTAL ROUTER - 10 HP - 29-1/2" THROAT

• Manufacturer: amxmachinery.com

PART: 2NC-NT750-10 - PEDESTAL ROUTER - 10 HP - THROAT 29-1/2" New with warranty 10 HP spindle drive motor 2 Speed Spindle: 8,100 / 16,300 RPM Depth stops: 6 position turret stops, adjustable Table surface area: 9...

VERTICAL SLIDING TABLE SAW - EVOLUTION - CAP. 169" X 66" X 3-1/8" X 3-1/8

PART: 2ST-EVOLUTION - SAWING MACHINE VERTICAL SLIDING TABLE SAW - EVOLUTION - CAP. 169" X 66" X 3-1/8" X 3-1/8 NEW WITH WARRANTY EVOLUTION Same Features as Standard S, plus: - Full-wood back support - great for t...

MULTIPLE DRILL - 46 DOUBLE ROW

• Manufacturer: amxmachinery.com

PART: 2JG-MAG-SYSTEM46 - MULTIPLE BORE - 46 DOUBLE ROW Provides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm). Front end adjustment for q...

BRAKE FOR METAL BENDING MACHINE

BRAKE FOR METAL BENDING MACHINE PART: 2GM-BB-612-6HD ISO 9002 certified Large 1-9/16" beam opening, adjustable 1" beam adjustment (front and back) Hem light gauge material 26 Ga. or thinner Total pieces fingers a...

MULTIPLE DRILL - SYSTEM 21

• Manufacturer: amxmachinery.com

PART: EJG-MAG-SYSTEM21 - MULTIPLE BORING - SYSTEM 21 Provides a 21 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking...

MULTIPLE DRILL - MAGGI SYSTEM 35

• Manufacturer: Maggi

PART: 2JG-MAG-SYSTEM35 - MULTIPLE BORING - MAGGI SYSTEM 35 Provides a 35 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with l...

MULTIPLE DRILL - SYSTEM 23

• Manufacturer: amxmachinery.com

PART: EJG-MAG-SYSTEM23 - MULTIPLE BORING - SYSTEM 23 Provides a 23 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking...

MULTIPLE DRILL - SYSTEM 29

PART: 2JG-MAG-SYSTEM29 - MULTIPLE BORING - SYSTEM 29 Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking...

CURTAIN BENDER - 6'6" x 10 GA

PART: 12321 - CURTAIN BENDING MACHINE - 6'6" x 10 GA USED - GOOD CONDITION Model no. QHD-6020 Bending capacity: 6'6" x 10 ga. mild steel Tonnage capacity: 70 tons Speeds approx: 2.2"/second fast approach. .39"/se...

PUNCHING MACHINE - 120 TON

• Maximum thickness: 101.6 mm

PART: 12323 - PUNCHING MACHINE - 120 TON USED - GOOD CONDITION Air clutch & brake Back geared type Shut height S.D.A.U.: 15-1/2" to top of bed Area of bed: 40" L-R x 30" F-B Area of slide: 19" L-R x 13" F-B EQUIP...