Machine Tools » Massachusetts

Search By Category

Search By Manufacturer

Building Filters

409

Used controller in Massachusetts, USA

  • Trusted Seller
    2004 Hanwha SL20H CNC Swiss

    2004 Hanwha SL20H CNC Swiss Screw Machine

    • Manufacturer: Hanwha

    Massachusetts, USA
  • Trusted Seller
    Quicktech Hybrid 9-Axis CNC Lathe

    Quicktech Hybrid 9-Axis CNC Lathe (2016)

    • Manufacturer: Quick-Tech
    • Model: T8-HY
    • Spindle bore: 65.79 mm

    Model: T8-HY | Swing over bed: 19.68" | Swing over cross slide: 11.81" | Max. turning diameter: 11.81" | Max. bar diameter: 2.56" | Max. turning length: 13.77" | Main spindle nose: A2-6 | Main spindle bore: 2.59...

    Worcester, MA
  • Trusted Seller
    Auction
    Daewoo Puma 12L-C CNC Lathe,

    Daewoo Puma 12L-C CNC Lathe, 12" Chuck, 40" Turn Length, Steady Rest, Chip Conveyor, S/N PL120723

    • Manufacturer: Daewoo
    • Model: Puma 12L

    Daewoo Puma 12L-C CNC Lathe, Fanuc Series 16T CNC Control, 22.8" Swing, 40" Turning Length, 12" 3-Jaw Chuck, A2-8 Spindle, 3" Bore, 2500 RPM, 30 HP Spindle Motor, 12-Station Turret, 10.2" X-Travel, 41.3" Z-Travel...

    Barnstable, MA
    Visit Auction Website
  • Trusted Seller
    2001 Hanwha ML20 CNC Swiss

    2001 Hanwha ML20 CNC Swiss Screw Machine

    • Manufacturer: Hanwha

    Massachusetts, USA
  • Trusted Seller
    2001 Hanwha ML20 CNC Swiss

    2001 Hanwha ML20 CNC Swiss Screw Machine

    • Manufacturer: Hanwha

    Massachusetts, USA
  • Trusted Seller
    2011 DMTG 31 x 79

    2011 DMTG 31 x 79 CKE6180Z Flat Bed CNC Lathe

    • Manufacturer: DMTG
    • Model: CKE6180Z
    • Spindle bore: 99.06 mm

    Swing over bed: 31.5" (800mm) | Max. length of workpiece: 78.7" (2000mm) | Swing over cross slide: 19.3" (490mm) | X-travel (approx.): 18" (457mm) | Z-travel: 70.5" (1790mm) | Spindle nose: C11 | Spindle bore: 3...

    Massachusetts, USA
  • 2005 HURCO TM8

    2005 HURCO TM8

    • Manufacturer: Hurco
    • Model: TM8

    Hurco MAX Chip Conveyor Tailstock Parts Catcher Bar capacity: 2.04" | Chuck size: 8" | Spindle speed: 4,800 RPM | Spindle motor: 20 HP | X axis travel: 8" | Z axis travel: 20" | Rapid rate z axis: 945 IPM | Turre...

    $23,000 USD

    Get financing

    Est. $433/mo

    Massachusetts, USA
  • CPO 315 HFA CNC

    CPO 315 HFA CNC

      This full-auto CNC saw features unlimited length settings, plus the first cut is always accurate! Easily program a quantity cut to a specific length OR program up to four separate lengths & part quantities to be ...

      Sutton, MA
    • Trusted Seller
      Automec Press Brake Control Upgrades

      Automec Press Brake Control Upgrades

      • Manufacturer: Automec, Inc.

      Automec has numerous different control options to properly fit your press brake and remove the obsolete electronics that make it problematic. Are you searching for a used press brake, but don't know if the electr...

      Waltham, MA
    • 10 ft. Hydraulic Box and

      10 ft. Hydraulic Box and Pan Brake, with NC Controller

        ISO 9001 certified Meet OSHA and CE safety standard 48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming...

        Sutton, MA
      • Trusted Seller
        Set of 3 CNC Lathe

        Set of 3 CNC Lathe Chucks

        • Manufacturer: Set of 3

        Chuck 1: 6" OD 2-jaw Chuck 2" 4.5" OD 3-jaw Chuck 3: 3" OD 3-jaw Includes box of various size jaw sets

        Worcester, MA
      • Trusted Seller
        Valenite CNC Lathe Boring Bar

        Valenite CNC Lathe Boring Bar 2" Diameter

        • Manufacturer: Valenite

        2" OD - 20" Length

        Worcester, MA
      • Trusted Seller
        2013 Hurco TM8i Slant-Bed CNC

        2013 Hurco TM8i Slant-Bed CNC Lathe

        • Manufacturer: Hurco
        • Model: TM8i

        Model: TM8i | Bar capacity: 2.6" | Spindle speed: 4,000 RPM | X-axis travel: 8" | Rapid rate x axis: 1,181 IPM | Z-axis travel: 20" | Rapid rate z axis: 1,181 IPM | Turret tools: 12 Station | Max. turning diamet...

        Worcester, MA
      • Trusted Seller
        CAT 50 Taper CNC Lathe

        CAT 50 Taper CNC Lathe Tool Holder

        • Manufacturer: CAT 50 Taper

        Cat 50 taper tool holder with collets and tool. Collets sizes: 3/8, 1/2, 5/8, 3/4, 7/8, 1.

        Worcester, MA
      • Haco – CNC Retrofits

        Haco – CNC Retrofits

        • Manufacturer: Haco - Atlantic

        Cost-effective solutions for all brands starting from €600! Customized CNC Retrofit controls for your CNC machine. Get the most out of your outdated machines! .

        Sutton, MA
      • no-image_en.png

        DMTG CKE6180Z CNC Lathe

        • Manufacturer: DMTG
        • Model: CKE6180Z

        Good condition DMTG CKE6180Z CNC Lathes manufactured in 2011. Located in USA and other countries. Click request price for more information.

        USA
      12345

      Overview

      Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

      FAQ

      What should I consider when buying a used machine tool?

      Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

      How do I ensure the machine tool is shipped safely to my location?

      Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

      What is the maintenance schedule for machine tools?

      Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.