Used Machine Tools in Saxony, Germany

ERNAULT-TOYODA coolant reservoir

• Manufacturer: Ernault Toyoda

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. for Ernault-Toyoda HES52) pump 120 l/min 3,5 bar 1.1 kW 220 / 380 V used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMR 71 G 4 F 0.75 kW 1380 rpm 220 / 380 V 3AC New, with documents !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS used, tested !

AS TECH bolt tensioning device

• Manufacturer: AS TECH

Bolt tensioning device AS TECH HWS Hand lever pump: HDP07001003 9158.22 Hydraulic nut: HWS16111131 9158.22.04 158 kN 700 bar approx. 2.0 m connection hose in metal case used, tested !

RÖHM Bezel

• Manufacturer: Röhm

Bezel, bezel, self-centering bezel RÖHM SLZP-52180 4-645-003-04

Bezel 350mm

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !