Used Machine Tools in Brandenburg, Germany

Kjellberg TITAN S

• Manufacturer: Kjellberg

Construction steel: S235 to S355 | Ship steel: A32/36, D32/36, A40, D40 | Pressure tank steel: S275 to S355 | Pipe steel: P195 to P355 | Cast steel: L210 to L360 | Stahlguss: GE200, GE240, GP 240, G21Mn5 | Reinf...

Kjellberg TITAN

• Manufacturer: Kjellberg

Construction steel: S235 to S355 | Ship steel: A, B, D, E, A32/36, D32/36, E32/36 | Fine-grained steel: S275 to S355 | Pressure tank steel: P195 to P355 | Pipe steel: L210 to L245 | Cast steel: GE200, GE240 | Re...

Kjellberg Individual Shielding Gas Systems

• Manufacturer: Kjellberg

Kjellberg InFocus 500

• Manufacturer: Kjellberg

Max. welding current: 500 A | Welding current at 100 % duty cycle: 500 A | Shielding gases: Ar, He, mixtures, ArH | Ignition: High-voltage ignition | Torch cooling: Coolant KJELLFROST | Clamping diameter: Ø 23 m...

Kjellberg KJELGOUGE

• Manufacturer: Kjellberg

Kjellberg FineMarker

• Manufacturer: Kjellberg

Output current: 4 - 25 A | Duty cycle: 100 % | Weight: 30 kg | Dimensions (l x b x h): 710 x 400 x 440 mm | Marking gases: Argon or air | Marking speed: 1.5 - 12 m/min | Plasma torch: PB-M25 W (liquid-cooled)

Kjellberg HiFocus 280i neo

• Manufacturer: Kjellberg

Power source: HiFocus 280i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 280 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 70 mm | Piercing: up to 40 mm | Dimensions (l x ...

Kjellberg HiFocus 360i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 80 mm | Piercing: up to 50 mm | Dimensions (l x ...

Kjellberg HiFocus 600i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 10 - 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 160 mm

Kjellberg Q 1500

• Manufacturer: Kjellberg

Power source: Q 1500 / Q 1500 plus | Cutting current at 100% d.c.1: 20 - 150 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 40 mm60 mm30 mm | Cutting ra...

Kjellberg Q 4500

• Manufacturer: Kjellberg

Power source: Q 4500 | Cutting current at 100% d.c.1: 20 - 450 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 70 mm120 mm50 mm | Cutting ranges stainles...

1992 Soraluce FSR 8000

• Manufacturer: Soraluce

2000 HANS SCHöN UTE FF 300

• Manufacturer: Hans Schön

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction J51...