Machine Tools » Flanders

Building Filters

108

Used frames in Flanders, Belgium

  • Trusted Seller
    LVD GANTRY-400T

    LVD GANTRY-400T

    • Manufacturer: LVD - Strippit

    Portaalrichtpers 400 ton Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... ...

    Deinze, Belgium
  • Trusted Seller
    Vermeulen Hydraulic press

    Vermeulen Hydraulic press

    • Manufacturer: Vermeulen
    • Capacity: 8,000 kg

    Hydraulic Tube endforming press Capacity: 8 ton | Max ram adjustment: 120 mm | Passage between uprights: 400 mm | Max distance between table - ram: 1000 mm

    Deinze, Belgium
  • Trusted Seller
    Hans Schoen UTE/B 100 ton

    Hans Schoen UTE/B 100 ton

    • Manufacturer: Schoen
    • Capacity: 100,000 kg

    Hans Schoen UTE/B 100 ton Capacity: 100 ton | Max ram adjustment: 150 mm | Passage between uprights: 650 mm | Max distance between table - ram: 375 mm | Dia table hole: 580 x 450 mm | Electric motor (power): 14 HP

    Deinze, Belgium
  • Trusted Seller
    SMG HZPU 200-1250/2000

    SMG HZPU 200-1250/2000

    • Manufacturer: SMG
    • Capacity: 200,000 kg

    stroke of counterpressure in table: 325 mm downward stroke in ram: 290 mm

    Deinze, Belgium
  • Trusted Seller
    Levert-Bousard Mobile 2x 80 Ton

    Levert-Bousard Mobile 2x 80 Ton

    • Manufacturer: Levert-Bousard

    max distance between portals: 1920 mm Montage dubbele portaalpers -- Mobiel -- + 2 palans Presse mobile de montage à portique double -- + 2 palan Mobile portal press

    Deinze, Belgium
  • Trusted Seller
    LVD 600 ton Dish end

    LVD 600 ton Dish end forming press

    • Manufacturer: LVD - Strippit
    • Capacity: 600,000 kg

    Deze portaalpers is geschikt voor de vervormen/deformeren van stalen platen. Voor de breedte en dikte van de platen geldt als algemene regel: 10 ton per mm plaatdikte. Is volledig gereviseerd Capaciteit: 600 ton ...

    Deinze, Belgium
  • Trusted Seller
    Bauer 400 ton Dish end

    Bauer 400 ton Dish end forming press

    • Manufacturer: Bauer 400 ton
    • Capacity: 400,000 kg

    This portalpress is suitable for all shipbuilding activities relative to the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness...

    Deinze, Belgium
  • Trusted Seller
    Cofmo 100 ton

    Cofmo 100 ton

    • Manufacturer: Cofmo

    Type: K23306 Capacity: 100 Ton | Clutch: pneumatic | Max adjustable stroke: 25 -> 130 mm | Workingspeed: 90 str/min | Passage between uprights: 400 mm | Table area: 850 x 560 mm | Dia table hole: 450 mm | Table f...

    Deinze, Belgium
  • Trusted Seller
    Benelli transfer press 250 ton

    Benelli transfer press 250 ton - 10 steps

    • Manufacturer: Benelli

    Last used for production of loudspeakers. Nominal power at 20 strokes/min: 2800 kgm 10 Stations + 1 exhaust: CC: 300mm Strokes / minute: 10 55 mm Max movinglenght feeder: 300 mm Max bandwidth: 300 mm AirCu...

    Deinze, Belgium
  • Trusted Seller
    Schuler 35 Ton

    Schuler 35 Ton

    • Manufacturer: Schuler

    Schuler 35 Ton Capacity: 35 Ton | Max adjustable stroke: 10 - 60 mm | Passage between uprights: 1200 mm | Distance between table -- ram: 375 mm | Dimension of the table: 1100 x 500 mm

    Deinze, Belgium
  • Trusted Seller
    Schalch 150 T + decoiler/feeder/cut

    Schalch 150 T + decoiler/feeder/cut to length

    • Manufacturer: Schalch

    Schalch excenterpress - also useable for perforation cap: 150 ton between columns: 1150 mm stroke: 200mm conveyorspeed: 3,5-14 m/min minimal cut: 2,5 mm sheetthickness: 2x 1,25 mm radiatorwidth: 200 - 950 mm radi...

    Deinze, Belgium
  • Trusted Seller
    Schalch 250 T + decoiler/slitting/feeder/cut

    Schalch 250 T + decoiler/slitting/feeder/cut to length

    • Manufacturer: Schalch

    Schalch Excenterpress - also useable for perforation capacity: 250 ton between columns: 1600 mm table: 1600 x 700 mm max open: 450 mm window: 230 x 330 mm stroke: 115 mm 250 strokes/min equiped with auto feeding ...

    Deinze, Belgium
  • Trusted Seller
    Arboga 250 ton

    Arboga 250 ton

    • Manufacturer: Arboga

    Type: R14-250-16 Double effect Press 150 Ton + 100 Ton 42 strokes / min.

    Deinze, Belgium
  • Trusted Seller
    Soenen 120T x 2300 mm

    Soenen 120T x 2300 mm

    • Manufacturer: Soenen

    pneumatic clutch 82 strokes/min Capacity: 120T x 2350 mm | Clutch: pneumatic (400 mm) | Max adjustable stroke: 30 mm (fixed) | Passage between uprights: 2355 x 600 mm | Distance between table -- ram: 250 mm | Dim...

    Deinze, Belgium
  • Trusted Seller
    Raskin 100 ton

    Raskin 100 ton

    • Manufacturer: Raskin

    type 1013GP 55 strokes per min Capacity: 100 ton | Clutch: airclutch | Max adjustable stroke: fixed 60 mm | Passage between uprights: 1350 mm | Distance between table -- ram: 350 mm | Dimension of the table: 1550...

    Deinze, Belgium
45678

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.