Building Filters
- Trusted Seller
Leinhaas 63 ton
- Manufacturer: Leinhaas
- Capacity: 63,000 kg
Hydraulic fast action press, no mechanical drive! Ideal for embossing making medals, coins,... type DDP2-C09-63H 95 strokes per minute
Deinze, Belgium - Trusted Seller
Soenen 2H5 200 ton
- Manufacturer: Soenen
- Capacity: 200,000 kg
Type 2H5 blank holder pressure: 80 ton blank holder stroke: 300 mm
Deinze, Belgium - Trusted Seller
ZM 200 ton
- Manufacturer: ZM
- Capacity: 200,000 kg
tafel: 1750 x 1750 mm Mes: 40 mm dik, 1300 mm lang Matrijs: 1300 lang, opening: 20 - 30 - 40 - 60 mm Dia cilinder +- 250 mm
Deinze, Belgium - Trusted Seller
Quiri 150 ton Dish end forming press
- Manufacturer: Quiri 150 ton
- Capacity: 150,000 kg
This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Machine Height: 4200 mm (600mm in flo...
Deinze, Belgium - Trusted Seller
SMG 200 Ton CNC
- Manufacturer: SMG
- Capacity: 200,000 kg
CNC Hydraulic deepdraw- transfer press line !! 4 dies available: 2 in use 2 reserve !! Equipped with HMS doublehead decoiler and HMS straightener HMS Straightener RS 87-03/0 max bandwidth: 300 mm 7 straightenin...
Deinze, Belgium - Trusted Seller
LVD - EMF 250 Ton
- Manufacturer: LVD - Strippit
- Capacity: 250,000 kg
Hydraulic Deepdraw Press 250 Ton Approaching speed: 300 mm/sec Counterpressure: 100 Ton Counterstroke: 325 mm Equipped with IMRD Decoiler, Straightener (cap width 550 mm), install- and feedsystem. IMRD Decoiler...
Deinze, Belgium - Trusted Seller
Sip 6000 ton rubber pad press
- Manufacturer: SIP
- Capacity: 6,000,000 kg
Ideal for automotive parts, deepdraw parts in limited numbers: simple tooling automatic feed in out table 2 hydraulic cilinders each with a diameter of 1000 mm used as rubber die press, but can also be used for ...
Deinze, Belgium - Trusted Seller
Valette panel press 410 ton
- Manufacturer: Valette panel press
- Capacity: 410,000 kg
vroeger gebruikt voor de productie van (sandwich)panelen/triplex 300 bar diameter cilinders: 300 mm Capaciteit: 410 ton Doorgang tussen de staanders: 1900 mm Maximale ramverstelling: 800 mm Afstand tussen tafel e...
Deinze, Belgium - Trusted Seller
Lasco TSP 250 ton
- Manufacturer: Lasco
can be used as deepdraw press or as forging press Type: TSP 200 So Capacity: 250 ton Passage between 500 mm Max ram 800 mm Distance between table -- 1300 mm Table 1000 x 1000 mm Max counter-pression in 120 to...
Deinze, Belgium - Trusted Seller
Darragon 50 ton heated
- Manufacturer: Darragon
2 presses Max pressure: 50 ton Table size: 400 x 500 mm Between columns: 400 mm Lower and upper table are heated Max temperature: 200° C
Deinze, Belgium - Trusted Seller
Dolouets 400 ton heated
- Manufacturer: Dolouets
Max pressure: 400 ton Table size: 1000 x 650 mm Between columns: 1000 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 9 ton
Deinze, Belgium - Trusted Seller
ZM press
- Manufacturer: ZM
ZM press Max ram adjustment: 400 mm | Passage between uprights: 800 mm | Max distance between table - ram: 500 mm
Deinze, Belgium - Trusted Seller
2014 Bosch Rexroth 300 / 150 / 150 ton
- Manufacturer: Bosch - Rexroth
Custombuilt mobile straightening press table: 4000 x 1030 mm between columns: 1030 mm one vertical cylinder: 300 ton - stroke: 600 mm - installed on movable column, 3 meter movement two horizontal cylinders: ...
Deinze, Belgium - Trusted Seller
ZM 260 ton
- Manufacturer: ZM
- Capacity: 260,000 kg
ZM 260 ton Capacity: 260 ton | Max ram adjustment: 350 mm | Passage between uprights: 1500 mm | Max distance between table - ram: 1500 mm | Dimensions of the table: 1300 x 760 mm | Weight: 9,5 ton
Deinze, Belgium - Trusted Seller
Vapo 250 ton
- Manufacturer: Vapo
- Capacity: 250,000 kg
Vapo 250 ton Capacity: 250 ton | Max ram adjustment: 300 mm | Max distance between table - ram: 700 mm | Dimensions of the table: 600 x 600 mm | Electric motor (power): 14 kW
Deinze, Belgium