Machine Tools » Emilia-Romagna

Building Filters

62

Used electronics in Emilia-Romagna, Italy

  • Trusted Seller
    Electronic Go/No Gauge

    Electronic Go/No Gauge

      Electronic Go/No Gauge

      Ferrara, Italy
    • Trusted Seller
      Moment Alpha Two One Electronic

      Moment Alpha Two One Electronic Torque and Angle Real Time Tester

      • Manufacturer: Tempo

      Moment Alpha Two One Electronic Torque and Angle Real Time Tester, Code CP5KR81 Including Various Heads and Accessories. S/No. KR056002/001 - CE Mark

      Ferrara, Italy
    • Trusted Seller
      Plasma cutting CR electronic 4000

      Plasma cutting CR electronic 4000 x 1500 source Debora Max 6/8 mm

      • Manufacturer: CR Electronic

      Bologna, Italy
    • Trusted Seller
      2015 TESA MICRO MS 343

      2015 TESA MICRO MS 343 measuring instrument manual

      • Manufacturer: Tesa

      Accompanying documents Compliance report Axis displacement: manual | Table top pieces: in black granite | Reading system: reading scales | Resolution: mm 0.001 | Electronic probe: Renishaw TP2 | X axis: mm 400 | ...

      San Giovanni in Marignano, Italy
    • VER5457 – 2500 mm Slitter

      VER5457 – 2500 mm Slitter Rewinder

        Stopped in November 2025 Width of paper: 2500 mm | Speed: 1500 mpm | Minimum width of output rolls: 80 mm | Electronics: SAEL (Siemens S7 system) | Knives: Dines | Cutting groups: Milltex | Unwinder: Maule

        Ravenna, Italy
      • FACCIN 4HEP-E

        FACCIN 4HEP-E

        • Manufacturer: Faccin-Biko
        • Model: 4HEP-E

        In line with Industry 5.0 The NEW 4HEP-E model is a four-roll powered roller with direct electric drive that offers unparalleled efficiency, productivity, and ergonomics. Productivity has increased with rotatio...

        Parma, Italy
      • Trusted Seller
        2001 Comev Leonardo CM 300x2000

        2001 Comev Leonardo CM 300x2000

        • Manufacturer: Comev

        Cnc control: D.Electron CN-Z32 | Center height: 300 mm | Max swing over the bench: Ø 600 mm | Max swing over the carriage: Ø 360 mm | Distance between centers: 2.000 mm | Bar diameter capacity through the spindl...

        San Martino In Rio, Italy
      • BIMAK CR

        BIMAK CR

        • Manufacturer: Bimak
        • Drilling diameter: 30 mm

        Standard depth mechanical stop Regulations and CE Declaration

        Medesano, Italy
      • BIMAK 13 DA

        BIMAK 13 DA

        • Manufacturer: Bimak
        • Drilling diameter: 13 mm

        Bench drill with flat table Drilling capacity in steel: 13 mm | Drilling capacity in cast iron: 16 mm | Tapping capability on steel: 6 M | Tapping ability on cast iron: 8 M | Spindle connection: 2CM/MT | Spindle ...

        Parma, Italy
      • BIMAK 22 FI - 22

        BIMAK 22 FI - 22 FO

        • Manufacturer: Bimak
        • Drilling diameter: 22 mm

        Standard depth mechanical stop Regulations and CE Declaration

        Medesano, Italy
      • COMAC 304 HV

        COMAC 304 HV

        • Manufacturer: Comac
        • Model: 304

        Three-roller bending machine for profiles and tubes with asymmetric geometry: upper roller in fixed position, lower rollers movable with independent adjustment. This type of machine is the most versatile and the ...

        Parma, Italy
      • BIMAK 25 TP - 25

        BIMAK 25 TP - 25 TM - 25 TMC

        • Manufacturer: Bimak
        • Drilling diameter: 25 mm

        Standard depth mechanical stop Regulations and CE Declaration

        Medesano, Italy
      • Trusted Seller
        2000 MORI SEIKI Vertical machining

        2000 MORI SEIKI Vertical machining center with rotopallet GV 503

        • Manufacturer: Mori Seiki
        • Model: GV-503

        Cnc control: MORI SEIKI MSC 806 | Machine weight (kg): 10.100 | Machine footprint (width x depth x height) (mm): 3.987×2.232×2.892 | Number of axles: 3 | Ec declaration: YES | Size cone: BT-40 | Spindle speed (r...

        San Martino In Rio, Italy
      • BIMAK 30 LA/LI - 30

        BIMAK 30 LA/LI - 30 LE/; LO - 30 LP/LPV - 30 LM/LMV

        • Manufacturer: Bimak
        • Drilling diameter: 30 mm

        Standard depth mechanical stop Regulations and CE Declaration

        Medesano, Italy
      • BIMAK 45 AC/M DIGITAL

        BIMAK 45 AC/M DIGITAL

        • Manufacturer: Bimak
        • Drilling diameter: 45 mm

        Standard depth mechanical stop Automatic depth stop standard Regulations and CE Declaration

        Medesano, Italy
      12345

      Overview

      Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

      FAQ

      What should I consider when buying a used machine tool?

      Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

      How do I ensure the machine tool is shipped safely to my location?

      Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

      What is the maintenance schedule for machine tools?

      Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.