Machine Tools » Czech Republic

Building Filters

202

Used engine in Czech Republic

  • Trusted Seller
    2006 SMS engineering CM 40

    2006 SMS engineering CM 40

    • Manufacturer: SMS engineering

    Maximum diameter of the pipe: 40 mm | Machine weight: 480 kg

    Brno, Czech Republic
  • Trusted Seller
    2014 PIERCE RUR 2500 G

    2014 PIERCE RUR 2500 G

    • Manufacturer: Pierce
    • Model: RUR 2500 G

    Equipment: Rails Baths It is also possible to burn using Oxygen and Propane Butane or Natural Gas...

    Brno, Czech Republic
  • Trusted Seller
    1970 WMW PEDN 63/1

    1970 WMW PEDN 63/1

    • Manufacturer: WMW
    • Model: PEDN 63/1

    Characteristic: Pressing pressure: 63 t Stroke: 10-130 mm Engine power: 5.5 kW Machine weight: 4400 kg

    Brno, Czech Republic
  • Trusted Seller
    1998 KOVOSVIT SP 12 D

    1998 KOVOSVIT SP 12 D

    • Manufacturer: MAS - Kovosvit

    Characteristic: Swing over bed : 160 mm Max. turning length : 500 mm Engine power : 10 kW Machine dimensions : 1100 x 2300 mm Machine weight : 2600 kg

    Brno, Czech Republic
  • Trusted Seller
    1956 ŠMERAL LKO 315

    1956 ŠMERAL LKO 315

    • Manufacturer: Šmeral Brno
    • Model: LKO 315

    Characteristic: Lenght: 3600 mm Width: 1750 mm Height: 4600 mm Ram stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Engine power: 25 kW Voltage: 380 V Frequency of oscillation: 50 Hz

    Brno, Czech Republic
  • Trusted Seller
    Gear Hobber TOS FO6

    Gear Hobber TOS FO6

    • Manufacturer: TOS

    Max. diam. gear: 800 mm | Table diameter: 600 mm | Max. modul: 6 | Main engine: 3 / 3.7 kW | Machine dimension: 2540 x 1400 | Machine weight: 4000 kg

    Prague, Czech Republic
  • Trusted Seller
    TOS W75 boring machine

    TOS W75 boring machine

    • Manufacturer: TOS

    Diam. of the spindle: 75 mm | Cone in the spindle: morse 5 | Dim. of the table: 950 x 950 mm | X: 1250 mm | Y: 900 mm | W: 1060 mm | Main engine: 11 kW | Machine weight: 10000 kg

    Prague, Czech Republic
  • Trusted Seller
    1979 SMERAL LEN 40 R

    1979 SMERAL LEN 40 R

    • Manufacturer: Šmeral Brno
    • Model: LEN 40 R

    Characteristic: Nominal force: 40 T Strokes per min. : 140 1 / min Slide adjustmen: 60 mm Slide stroke: 8-95 Min.shut height strok : 235 mm Max.shut height stroke: 295 mm Slide dimensio: 400 x 250 mm Clamping su...

    Brno, Czech Republic
  • Trusted Seller
    TOS W75 boring machine

    TOS W75 boring machine

    • Manufacturer: TOS

    Diam. of the spindle: 75 mm | Cone in the spindle: morse 5 | Dim. of the table: 950 x 950 mm | X: 1250 mm | Y: 900 mm | W: 1060 mm | Main engine: 11 kW | Machine weight: 10000 kg

    Prague, Czech Republic
  • Trusted Seller
    WMW thread rolling machine UPW12,5x70

    WMW thread rolling machine UPW12,5x70

    • Manufacturer: WMW
    • Model: UPW 12.5X70
    • Threading length: 125 mm

    Maximum diameter of the piece: 70 mm / 2.75″ | Thread length min./max.: 125 mm / 2000 mm | Shaft diameter: 63 mm | Force: 12.5 tons | Engine power: 8 kW / 10 HP | Machine weight: 2000 kg

    Prague, Czech Republic
  • Trusted Seller
    Straightening press ZDAS CDN 400B

    Straightening press ZDAS CDN 400B

    • Manufacturer: Zdas
    • Stroke length: 1,000 mm

    Rated deformation force: 400 t | Working area of table: 3100 x 6000 mm | Max. ram stroke: 1000 mm | Clearance between columns: 3100 mm | Output of main engine: 15 kW | Height of the machine: 4170 mm | Widht of t...

    Prague, Czech Republic
  • Trusted Seller
    2001 FMB JUPITER

    2001 FMB JUPITER

    • Manufacturer: FMB
    • Model: Jupiter

    Engine power (saw drive): 2.4 kW | Weight: 1150 kg

    Brno, Czech Republic
  • Trusted Seller
    1980 TOS BUA 25

    1980 TOS BUA 25

    • Manufacturer: TOS
    • Model: BUA 25
    • Grinding length: 1,000 mm

    Digital display devices be inoperative Maximum-diameter of grinding: 250 mm | Grinding length: 1000 mm | Maximum-weight of workpiece: 60 kg | Engine power: 4 kW | Machine weight: 3000 kg

    Brno, Czech Republic
  • Trusted Seller
    1979 MAS VR 6 A

    1979 MAS VR 6 A

    • Manufacturer: MAS - Kovosvit
    • Model: VR-6
    • Column size: 400 mm

    Machine dimensions: 3240x1300x3900 mm New electric motor 2015 New lubrication procedures 2016

    Brno, Czech Republic
  • Trusted Seller
    VOLMAN N 30

    VOLMAN N 30

    • Manufacturer: Volman
    • Spindle bore: 70 mm

    OTECO sandblasting equipment is part of the offer.

    Brno, Czech Republic
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.