Used Machine Tools in Saxony, Germany

Trusted Seller
Röhm KFG-300/3 (Nr. 36)
- Manufacturer: Röhm
EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar
Leipzig, Germany
Trusted Seller
1985 WMW 350
- Manufacturer: WMW
face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm
Leipzig, Germany
Trusted Seller
Röhm SSH 200/3 (Nr. 44)
- Manufacturer: Röhm
stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws
Leipzig, Germany
Trusted Seller
WMW PS 800
- Manufacturer: WMW
This face plate has no clamping claws. It is clamped using the associated Ø 790 x 26 mm clamping disk. The clamping grooves are 300 mm long and arranged in a radial pattern. T-slots according to DIN 650: a=22mm; ...
Leipzig, Germany
Trusted Seller
WMW Niles 250x4
- Manufacturer: Niles
4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and f...
Leipzig, Germany
Trusted Seller
FORKARDT F+ 200x3
- Manufacturer: FORKARDT
Flange mounting Ø 185 mm; size Ø 200 x 25 mm, pitch circle Ø 132 mm, bolt size Ø 21mm x / M12, through-hole Ø 105mm conical Jaw connection FBG 200 Clamping range of the jaws max. Ø 200mm with chuck key incl. 26 s...
Leipzig, Germany
Trusted Seller
Röhm KFD-F-EC 400/3 (Nr.35)
- Manufacturer: Röhm
Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken
Leipzig, Germany
Trusted Seller
WMW 600x3
- Manufacturer: WMW
3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key
Leipzig, Germany
Trusted Seller
WMW PS 1000
- Manufacturer: WMW
Equipment: -4x external/internal jaws; clamping range min./max.: approx. Ø 320mm / max.: approx. Ø 900mm; clamping stroke approx. 200mm -Clamping slots according to DIN 650: a=22mm; h=43mm; b=38mm; c=15mm x lengt...
Leipzig, Germany
Trusted Seller
PST 1,3
- Manufacturer: PST
3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting
Leipzig, Germany
Trusted Seller
1999 WMW 5500x1500x250
- Manufacturer: WMW
- distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D.
Leipzig, Germany
Trusted Seller
WMW 800x300
- Manufacturer: WMW
surface plate does have holes! Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 800 mm | Table width: 300 mm | Table height: 130 mm | Weight...
Leipzig, Germany
Trusted Seller
WMW 660x450
- Manufacturer: WMW
fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm
Leipzig, Germany
Trusted Seller
WMW AP 4000x2000x310
- Manufacturer: WMW
Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D.
Leipzig, Germany
Trusted Seller
WMW AP 3000x1775
- Manufacturer: WMW
Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longi...
Leipzig, Germany