Used Machine Tools in Saxony, Germany

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

Moritz Perthel MP 400 x 200

• Manufacturer: Moritz Perthel

MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm)

WMW AW 625x520x820 (Nr. 24+25)

• Manufacturer: WMW

2 pieces available (price per piece) without T-slots Oblong hole Ø 33 x 330 mm

WMW AW 2600x900x1200 (5801+5830)

• Manufacturer: WMW

Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slot...

WMW AW 1300x1000x1600 (Nr. 3-6)

• Manufacturer: WMW

3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage bezi...

WMW AW 250x250x180

• Manufacturer: WMW

2 pieces clamping angle available (No. 1104021 A is slightly thinner)

WMW AW 630x800x1600 (Nr. 9)

• Manufacturer: WMW

T-slots to DIN 650: T-slot width a= 28; h= 48; b= 49; c= 22 mm; T-slot spacing 200 mm 22 mm

1974 VEB ELEKTROTECH.GERAETE FE 200 / 630

• Manufacturer: VEB ELEKTROTECH.GERAETE

Magnetic clamping plate 120 watts 13x induction loops, width 20mm spacing 43mm

WMW AW 700x910x600

• Manufacturer: WMW

Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm...