Machine Tools » Brandenburg

Building Filters

13

Used loading in Brandenburg, Germany

  • Trusted Seller
    Auction
    ZIERSCH & BALTRUSCH 800 CNC

    ZIERSCH & BALTRUSCH 800 CNC QUICK CNC Surface Grinding Machine - 1996

    • Manufacturer: Ziersch & Baltrusch

    Control: Siemens Sinumerik 805 Grinding length: 800 mm Grinding width: 300 mm Workpiece height: 300 mm Table load: 800 kg Grinding wheel diameter: 400 mm Grinding wheel width max: 50 mm Operating voltage: 380 V T...

    Falkenberg/Elster, Germany
    Visit Auction Website
  • Atlas Hydraulic Swing Arm Punching

    Atlas Hydraulic Swing Arm Punching Machine

    • Manufacturer: Atlas-Copco

    Punching size 55 x 55 cm Punching machines for manual loading of material and tooling are particularly suitable for smaller batch sizes or smaller part dimensions. Punching surface swivels Support table ca.50x100cm

    Dabergotz, Germany
  • Hydraulic swing arm punching machine

    Hydraulic swing arm punching machine USM DVSM-30

    • Manufacturer: USM

    for manual loading of material and tooling, especially suitable for smaller batch sizes or smaller part dimensions. Pressure capacity 250 KN Punching surface approx. 30 x 50 cm swiveling Support table approx. 45 ...

    Dabergotz, Germany
  • 1981 sperr & Lechner Splek

    1981 sperr & Lechner Splek SLF II A 200 S

    • Manufacturer: sperr & Lechner

    FNP electric folding low pressure press SLF II A 200 from year of manufacture 1981 Description: The folding low-pressure press is used to press off the fold on the spine of the book and has two pressing stations ...

    Dabergotz, Germany
  • REMS Tornado Typ 2010

    REMS Tornado Typ 2010

    • Manufacturer: Rems
    • Model: TORNADO TYP 2010

    Threading machine Rems Tornado type 2010 220V, 50Hz Used equipment Threading machine for pipe threads (1/16) 1/8 - 2″, 16 - 63 mm, bolt threads (6) 10 - 60 mm, 1/4 - 2″. With maintenance-free gearbox, safety foot...

    Dabergotz, Germany
  • no-image_en.png

    Kjellberg GTH 1202

    • Manufacturer: Kjellberg
    • Amperage: 1,202 A

    Power source: GTH 1202 | Mains voltage: 3/PE AC 50 Hz; 400 V ± 10 % | Connected load at 100% duty cycle: 82.5 kVA | Fuse (slow): 125 A | Welding current range: 100 A / 19 V - 1400 A / 44 V | At 100 % duty cycle:...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg GTH 802

    • Manufacturer: Kjellberg
    • Amperage: 802 A

    Power source: GTH 802 | Mains voltage: 3/PE AC 50Hz; 400 V ±10 % | Connected load at 100% duty cycle: 44 kVA | Fuse (slow): 63 A | Welding current range: 80 A / 18 V - 800 A / 44 V | At 80 % duty cycle: 800 A / ...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg KSI 1000

    • Manufacturer: Kjellberg
    • Amperage: 1,000 A

    Power source: KSI 1000 | Mains voltage: 3/PE AC 50/60 Hz, 400 V ±10 % | Connected load at 100% duty cycle: 51,5 kVA | Fuse: 125 A (80 A or 100 A also possible) | Welding current range: 80 – 1000 A / 18 – 44 V DC...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg iQ-Series

    • Manufacturer: Kjellberg

    Power source: iQ 1500iQ 1500 plus | Cutting currentat 100% d.c.1: 20 - 150 A | Marking currentat 100% d.c.1: 5 - 60 A | Cutting ranges: iQ-Gas O2 | Mild steelrecommendedmaximumpiercing: 0,5 - 40 mm60 mm35 mm | S...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg Q 1500

    • Manufacturer: Kjellberg

    Power source: Q 1500 / Q 1500 plus | Cutting current at 100% d.c.1: 20 - 150 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 40 mm60 mm30 mm | Cutting ra...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg Q 4500

    • Manufacturer: Kjellberg

    Power source: Q 4500 | Cutting current at 100% d.c.1: 20 - 450 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 70 mm120 mm50 mm | Cutting ranges stainles...

    Finsterwalde, Germany
  • no-image_en.png

    Kjellberg Q 3000

    • Manufacturer: Kjellberg

    Power source: Q 3000 / 3000 plus | Cutting current at 100% d.c.1: 20 - 300 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 60 mm80 mm50 mm | Cutting rang...

    Finsterwalde, Germany
  • 2007 ARGO A-56plus + APC

    2007 ARGO A-56plus + APC

    • Manufacturer: ARGO

    CNC Hi-Speed Machining center vertical Suitable for all kinds of machining such as surface milling, drilling, reaming, taping and curving. Suitable for machining the material of steeel, iron, alloy aluminium, b...

    Cottbus, Germany

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.