Machine Tools » Beijing

Building Filters

31

Used rm in Beijing, China

  • Mini 1535nm Erbium Glass Lasers

    Mini 1535nm Erbium Glass Lasers

      All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.

      Beijing, China
    • 400~500μJ 1535nm Erbium Glass Lasers

      400~500μJ 1535nm Erbium Glass Lasers

        All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.

        Beijing, China
      • T01 Series Eye-safe Laser Transmitter

        T01 Series Eye-safe Laser Transmitter

          All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.

          Beijing, China
        • T02 Series Eye-safe Laser Transmitter

          T02 Series Eye-safe Laser Transmitter

            All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.

            Beijing, China
          • NLSO Series Single-Mode Narrow Linewidth

            NLSO Series Single-Mode Narrow Linewidth Diode Laser Module

              1. *532nm is diode pumped solid-state laser. 2. Higher power options available upon request. 3. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the...

              Beijing, China
            • MCO Series Energy Adjustable Fiber

              MCO Series Energy Adjustable Fiber Pigtailed Microchip Laser 532nm

                1. Operation Frequency is 16~200 Hz, in Continous mode or Burst mode. 2. As products are constantly being updated, the right of final interpretation of technical specifications or illustrations in datasheet belo...

                Beijing, China
              • MCO Series Energy Adjustable Fiber

                MCO Series Energy Adjustable Fiber Pigtailed Microchip Laser 266nm

                  1. Operation Frequency is 16~200 Hz, in Continous mode or Burst mode. 2. As products are constantly being updated, the right of final interpretation of technical specifications or illustrations in datasheet belo...

                  Beijing, China
                • MCO Series Energy Adjustable Fiber

                  MCO Series Energy Adjustable Fiber Pigtailed Microchip Laser 1064nm

                    1. Operation Frequency is 16~200 Hz, in Continous mode or Burst mode. 2. As products are constantly being updated, the right of final interpretation of technical specifications or illustrations in datasheet belo...

                    Beijing, China
                  • MCD Series 350ps Microchip Laser

                    MCD Series 350ps Microchip Laser 266nm

                      1. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad. 2. OEM seed laser drivers are available. 3. All the data in the above table are the typical values obt...

                      Beijing, China
                    • MCA Series 1.5ns Microchip Laser

                      MCA Series 1.5ns Microchip Laser 355nm

                        1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）. 2. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and th...

                        Beijing, China
                      • MCH Series 300ps SLM Microchip

                        MCH Series 300ps SLM Microchip Laser 532nm

                          1. Wavelengths of 355nm and 266nm are available upon request. 2. Other repetition rates can be customized. 3. All the data in the above table are the typical values obtained from the tests at room temperature o...

                          Beijing, China
                        • MCC Series 750ps Microchip Laser

                          MCC Series 750ps Microchip Laser 213nm

                            1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）. 2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad. 3. All ...

                            Beijing, China
                          • MCC Series 750ps Microchip Laser

                            MCC Series 750ps Microchip Laser 266nm

                              1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）. 2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad. 3. All ...

                              Beijing, China
                            • MCC Series 750ps Microchip Laser

                              MCC Series 750ps Microchip Laser 355nm

                                1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）. 2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad. 3. All ...

                                Beijing, China
                              • MCD Series 350ps Microchip Laser

                                MCD Series 350ps Microchip Laser 355nm

                                  1. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad. 2. OEM seed laser drivers are available. 3. All the data in the above table are the typical values obt...

                                  Beijing, China
                                123

                                Overview

                                Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

                                FAQ

                                What should I consider when buying a used machine tool?

                                Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

                                How do I ensure the machine tool is shipped safely to my location?

                                Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

                                What is the maintenance schedule for machine tools?

                                Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.