Used parallel in Australia

Robland Z400-EL Panel Saw

• Manufacturer: Robland

Sliding table panel saw by Robland, 3200mm, 330 to 400mm blade. Cutting depth at 90deg = 125mm, at 45deg = 90mm. Scoring unit with 120mm blade. 7kW main motor. Specifications: Motor: 7kW, speeds: 3000 / 4000 / 50...

Robland Z500 Series Panel Saw

• Manufacturer: Robland

Sliding table panel saw by Robland, 3200mm, 300 to 500mm blade. Maximum cutting depth at 90deg = 175mm, at 45deg = 120mm. Scoring unit with 120mm blade. 7kW main motor. Specifications: Motor: 7kW, speeds: 3000 / ...

Jorns JDB Double Bending Slitter Folder

• Manufacturer: Jorns

1.25mm – 3mm Bending Capacity 3200mm – 12200mm Bending Length CP200Twin Graphic Control System Additional SSD Card w/ Windows & Machine Image Duplicate Conical Electric Clamping Finger Triple Divided Clamping Sys...

Jorns JB Slitter Folder

• Manufacturer: Jorns

1.25mm – 3mm Bending Capacity 4000mm – 12200mm Bending Length CP200 Graphic Control System Additional SSD Card w/ Windows & Machine Image Duplicate Automatic Parallel Back Gauge System Detachable Hydraulic Shear ...

Hidrogarne Hydraulic Beam Cambering Press - CNC Control

The Hidrogarne HV/NC series horizontal hydraulic ram press is designed with a range of three different powers ranging from 150 to 300 tons. Horizontal hydraulic presses are specially designed for straightening an...

Madison PB32.125 Hydraulic NC Pressbrake

Specification: Tonnage 60- 400T Working Length 1600 - 6000 mm Features: Hydraulic down-stroking press brake with control of the parallelism between beams by solid torsion bar. Bending depth adjustment NC controll...

Douglas Protractor 127mm square

• Manufacturer: Douglas

Made in Australia Features: Frosted grid area for pencil marking with crystal clear measuring edges Graduated in 1° increments 127mm x 127mm square grid pattern printed in the center section of the protractor Can...

Robland E 2500 Panel Saw

• Manufacturer: Robland

Professional panel saw with a cutting width of 1270mm & table stroke of 2500mm. Features include scoring unit with fine adjustment, blade diameter 300mm, cutting depth of 100mm and parallel fence & crosscut fence...

MADISON NC Pressbrake Series

Features include: MADISON Pressbrakes are synchronised torsion bar machines with positive nut stop system, this ensures consistent and accurate bending beam parallelism tolerance to 0.01mm via the Maper NC Contro...

YSD 70 TON | 3000MM CNC PRESS BRAKE | 2 AXIS | SERVO X & Y AXIS | DELEM DA-52 CONTROLLER

3000mm x 70 ton Delem 2 Axis DA41S (hOLLAND) Programmable Controller. Ball Screw Power Operated Back gauge is fitted as standard with Very fast Servo Motor YSD are made under Technology Licence for LVD Belgium. F...

Easy Laser D92 BTA Belt Alignment Tool

• Manufacturer: Easy-Laser

The Easy-Laser D92 BTA is attached to the side of the sheave/pulley and not to the belt groove. This means it is just as easy to adjust v-belt, flat belt and timing belt pulleys as chain wheels. The clever design...

Dual Beam Drill Rig alignment laser

• Manufacturer: GSR

Magnetically clips to the long hole rail to align it square to the drilling rig. Anodised Body increasing longevity. A single alkaline battery with on/off button make this a simple tough easy to use system. Alumi...

Corimpex Automatic Beam Welding Machines

Corimpex Beam Welding Lines are automatic, two or four head submerged arc-welding lines. These machines are specifically designed for the manufacture of welded T and double T girder-beams with parallel or converg...

Akyapak AHK 3 Roll Hydraulic Plate Rolls

• Manufacturer: Akyapak

Akyapak manufactures 3 Roll Hydraulic Plate Bending machines with the bending capacity range of 2 mm to 200 mm thickness and 1000 mm to 12000 mm in width. The machine frames are fabricated using high strength wel...