Used processing equipment in New Jersey, USA

Titanium Luwa-Heine HSZ412 Centrifuge-Peeler - IPP# 232764

• Manufacturer: Luwa

horizontal peeler centrifuge basket thickness 16mm Titanium hinged front door with hydraulic clamp mechanism 44kw (60hp) 3/50/400/690 volt IP55, class 1 Div II motor, hydraulic operated peeler mechanism with fron...

Stainless Steel 316L Luwa-Heine 342 Manual Discharge-Top Centrifuge-Basket - IPP# 217586

• Manufacturer: Luwa

top load/unload basket centrifuge 8mm thick basket lid with hydraulic assist with powerpack 50mm feed pipe, 25mm wash pipe, 85mm filtrate

Titanium Luwa-Heine HSZ412 Centrifuge-Peeler - IPP# 232761

• Manufacturer: Luwa

horizontal peeler centrifuge basket thickness 16mm Titanium hinged front door with hydraulic clamp mechanism class 1 Div II motor, hydraulic operated peeler mechanism with front discharge chute peeler driven by a...

Luwa-Heine 342 Manual Discharge-Top Centrifuge-Basket - IPP# 217585

• Manufacturer: Luwa

top load/unload halar lined 12mm thick basket lid with hydraulic assist with powerpack 50mm feed pipe, 25mm wash pipe 150/80mm filtrate

LCI (Luwa) Wiped/Thin Film Evaporator Pilot Skid 5.1 sq. ft. - IPP# 247796

• Manufacturer: Luwa

Stainless Steel 316 Luwa SMS Wiped/Thin Film Evaporator - IPP# 88542

• Manufacturer: Luwa

Rated vac int. Upper jkt rated 257 psi (17.5 Kg/cm2) @ 208 deg C, lower jkt rated 205 psi (14 Kg/cm2) @ 298 deg C. 10" btm cone, 8" dia x 24" long entrainment section No motor, unit is setup for belt drive No stand.

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215309

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215308

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215304

• Manufacturer: Luwa

jacketed horizontal wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts 323.9mm ID x 8450mm long x 7mm thick carbon steel jacket 368mm diameter...

Dryer Thin Film Luwa SMS DK600/4500/10 Stainless Steel 316 - IPP# 70267

• Manufacturer: Luwa

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

Titanium Luwa SMS Shell and Tube Heat Exchanger - IPP# 217810

• Manufacturer: Luwa

pressure tube side 30 bar@ 200 degrees C (640 liter), shell side 10 bar @ 200 degrees C (540 liter) shell with expansion bellows (4) internal baffle plates (2) titanium hemispherical heads TUV certified

Stainless Steel 316 Luwa SMS HS0050 Wiped/Thin Film Evaporator - IPP# 102561

• Manufacturer: Luwa

jkt rated 16 kg/sq cm @ 200 deg C. 9 gal capacity W/(2) rows of str blades and (2) rows of positive pitched blades @ 25 deg angle on central core. Driven by 20 HP, 1170 rpm Reeves variable speed drive, 6.2:1 rati...

Hastelloy - C276 Luwa SMS MLK4-0600/4500/90 Wiped/Thin Film Evaporator - IPP# 226240

• Manufacturer: Luwa

jacketed wiped film evapaorator jacket 2.76 bar @ 250 deg C, 4- sections of carbon steel limpet coils on body and bottom cone,Rotor with 4-fixed blades (unused Hastelloy C276 spare rotor available) rotor belt dri...

Stainless Steel 316L Luwa SMS KH-600-S SAKO Wiped/Thin Film Evaporator - IPP# 221539

• Manufacturer: Luwa

thin film evaporator jacket -1/1.1 bar @ 350 deg C (110ltr) 316L s/steel (1,4404) chamber, c/steel jacket on straight side only, 316L s/steel rotor, Crane 109 double mechanical seal with lubricator, speed 191 rpm...