Used process in New Jersey, USA

Titanium Luwa-Heine HSZ412 Centrifuge-Peeler - IPP# 232761

• Manufacturer: Luwa

horizontal peeler centrifuge basket thickness 16mm Titanium hinged front door with hydraulic clamp mechanism class 1 Div II motor, hydraulic operated peeler mechanism with front discharge chute peeler driven by a...

Luwa-Heine 342 Manual Discharge-Top Centrifuge-Basket - IPP# 217585

• Manufacturer: Luwa

top load/unload halar lined 12mm thick basket lid with hydraulic assist with powerpack 50mm feed pipe, 25mm wash pipe 150/80mm filtrate

Titanium Luwa-Heine HSZ412 Centrifuge-Peeler - IPP# 232764

• Manufacturer: Luwa

horizontal peeler centrifuge basket thickness 16mm Titanium hinged front door with hydraulic clamp mechanism 44kw (60hp) 3/50/400/690 volt IP55, class 1 Div II motor, hydraulic operated peeler mechanism with fron...

Stainless Steel 316L Luwa-Heine 342 Manual Discharge-Top Centrifuge-Basket - IPP# 217586

• Manufacturer: Luwa

top load/unload basket centrifuge 8mm thick basket lid with hydraulic assist with powerpack 50mm feed pipe, 25mm wash pipe, 85mm filtrate

Shell and Tube Heat Exchanger 31 m² (333.7 ft²) Stainless Steel Austenitic - IPP# 219229

• Manufacturer: Luwa

no heads pressure shell side -1/6.2 bar @ 250 deg C (289 ltr), tubeside -1/6.2 bar @ 250 deg C (203 ltr)

Luwa SMS Wiped/Thin Film Evaporator - IPP# 82183

• Manufacturer: Luwa

6-blade Luwa evaporator rotor only.

Stainless Steel 316L Luwa SMS HM-1200 Wiped/Thin Film Evaporator - IPP# 706885

• Manufacturer: Luwa

jacketed thin ‘filmtruder’ evaporator system, internal pressure -1/3.2 bar @ 200 degrees C (3900 liter), top jacket 7 bar @ 200 degrees C (11 liter), straight side jackets 7 bar @ 200 degrees C (3 x 65 liter), bo...

Stainless Steel 316 Luwa SMS LB-0050 Wiped/Thin Film Evaporator - IPP# 217821

• Manufacturer: Luwa

jacketed wiped thin film evaporator with column and condenser pressure internal -1/3 bar @ 250/350 deg C (38ltr) jacket 29.6/26.9 bar @ 250/350 deg C (6ltr) s/steel jacket on straight side only, rotor belt driven...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215303

• Manufacturer: Luwa

jacketed horizontal wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts 323.9mm ID x 8450mm long x 7mm thick carbon steel jacket 368mm diameter...

Stainless Steel 316L Luwa SMS 850/4700/10 Dryer-Thin Film - IPP# 70258

• Manufacturer: Luwa

thin film continuous contact dryer. Jkt rated 13 bar @ 220 deg C, Shell 850mm (34") dia x 4800mm (15.8') long,

Dryer-Thin Film Luwa SMS D-850/4700/10 Stainless Steel 316 - IPP# 70263

• Manufacturer: Luwa

pressure internal rated 0.5 bar and full vauumc @ 220 degrees C. Jacket 13 bar @ 220 degrees C, Shell 850mm diameter x 4800mm long,

LCI (Luwa) Wiped/Thin Film Evaporator Pilot Skid 5.1 sq. ft. - IPP# 247796

• Manufacturer: Luwa

Stainless Steel 316 Luwa SMS Wiped/Thin Film Evaporator - IPP# 88542

• Manufacturer: Luwa

Rated vac int. Upper jkt rated 257 psi (17.5 Kg/cm2) @ 208 deg C, lower jkt rated 205 psi (14 Kg/cm2) @ 298 deg C. 10" btm cone, 8" dia x 24" long entrainment section No motor, unit is setup for belt drive No stand.

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215309

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...