Used Agitators, Blenders, Mixers in Germany

3500 liter agitator tank, Aisi 304 with propeller agitator

remarks: 1 stronger dent in the transition from cylinder to upper bottom; small dents in the cylinder; Foot reinforcements, Fe; Outlet extension bent

5000 liter agitator tank, Aisi 304 with propeller agitator

• Manufacturer: Behälter KG Bremen

Volume: 5.000 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.540 mm | Cylindrical height: 2.500 mm | Total height: 4.600 mm | Manhole: in the upper bottom (Ø 500) | Technical equipment: c...

700 liter agitator tank, Aisi 304 with propeller agitator

remarks: Outlet fitting lower than the foot ends (take this into account when setting up); 1 screwed lid segment at the top edge (the rest is open); see photos

850 liter insulated agitator tank, Aisi 304 with propeller agitator

notice: some residues of previous content, bump at the insulation jacket remarks: Tank on frame rest made of Fe; Fastening of the manhole cover incomplete agitator features: Agitator motor with signs of corrosion...

65 liter agitator tank, Aisi 316 with propeller agitator

Volume: 65 liter | Lower bottom: flat bottom | Upper bottom: open | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 430 mm | Cylindrical height: 480 mm | Total height: 1.120 mm | Outlet: 32 mm | Rem...

10000 liter agitator tank with inclined blade agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

1300 liter pharmacy agitator tank, Aisi 316 with dissolver agitator

• Manufacturer: H&K Behälter- und Edelstahltechnik

agitator features: There is also 1 propeller on the agitator shaft (see photos)

Dissolving agitator container LEHMANN - approx. 100 kg usable capacity.

• Manufacturer: Lehmann

6500 liter agitator tank, Aisi 304 with 2 propeller agitators

max. allowable working temperature: 90 °C remarks: Cone height approx. 1300 mm; Manhole approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover in the upper bottom; in 1 tank 1 small crack ...

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0.9 cubic meters | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lo...

5000 liter insulated agitator tank, Aisi 316 with 3 agitators

remarks: 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for...

500 liter pharmacy agitator tank, Aisi 316 with blades agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions) agitator features: Attention: Stirrer shaft (1.4301) and baffle (1.4541), Ais...

Pneumatic agitator from – with stirring rod 27105

• Manufacturer: Tige

Compulsory mixer, agitator, mixing tool, compressed air manual agitator, compressed air agitator