Used headers

Asahi Okuma AT-635 2D/2B Cold Header

• Manufacturer: Okuma

SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * TONS of TOOLING!!

Nakashimada PF-860 2D/3B Cold Header 5/16″

• Manufacturer: Nakashimada

8mm NAKASHIMADA PF-860 2-DIE/3-BLOW COLD HEADER WITH FINGERLESS TRANSFER SPECIFICATIONS: MAX. 1 ST MAX. 2 ND MAX. PRODUCTION RATE: 50 – 120 PPM FEATURES: POSITIVE KNOCKOUT IN 2 ND & 3 RD PUNCH DIE RELIEVING KNOCK...

1981 National Extra Long Stroke 4Die Progressive Cold Header

• Manufacturer: National

Equipped With * Large Free Standing Two Plane Straightener * Ajax Hogue #4 Wire Drawer * PKO ** Machine is a four die progressive header but only using the machine as three die. There is no kickout in fourth die ...

2015 5/8" x 5" National HS LS-DSSD Warm Header

Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...

WATERBURY #33

• Manufacturer: Waterbury Farrel
• Model: 33

Equipped With * Lots of Tooling Available Max. for extruding and collaring: 5/8"

Morris 0RC-23A

• Manufacturer: Morris

Find many great new & used options and get the best deals for MORRIS OMEGA COLD HEADER MODEL 0 RC-23A 2MM .0787" ITALY IN EXCELLENT COND.. Free shipping for many products!

HILL-ACME 1-1/4″ UPSETTER

• Manufacturer: Hill Acme

Equipped With * AIR CLUTCH Capacity: 1-1/4" | Stroke of header slide: 7" | Stock gatherer: 3-3/4" | Hold or recede: 1-1/2" | Die of opening: 2" | Depth of die pocket: 12" | Width of die pocket: 8" | Length of die...

Header Cold Hilgeland CF5AZ

• Manufacturer: Hilgeland
• Model: CF5AZ

2 Die – 3 Blow Transfer Header, Bushing cut-off Diameter range : 16 mm, Number of dies : 2, Number of stations : 4, Output-pieces/min : 100, Shaft length under head : 130 mm, Cutting length : 160 mm, Weigh...

Header Cold Hilgeland CH6V

• Manufacturer: Hilgeland
• Model: CH6V

Double Blow Header, Diameter range : 10-20 mm, Shaft length under head : 180 mm, Cutting length : 230 mm, Output - pieces/min : 45/50/56, Press power : 160 ton, Plane of stroke : 240 mm, Weight : 25 tons, ...

Header Progressive Bolt Makers BM20

• Manufacturer: National

Diameter range: 24 mm, Number of dies: 4, Max. Punch k.o. Stroke 30 mm Min/max. Cutoff of length : 50/200 mm, Die k.o. Stroke : 30/155 mm, Max thread length : 75 mm, Min. Bolt with thread m-16 x 50 din 933,...

1-1/8" Hasenclever WSHK-100 w/Ajax pwr spl, 80kW Toccotron

• Manufacturer: Hasenclever

Specs: 100 tons of Upsetting Force 125 tons of Gripping Force Total stroke of header slide: 180mm Effective Upsetting stroke: 112mm Stroke of top gripping jaw: 85mm Dimension of gripping jaws: height of one jaw: ...

Header Progressive Bolt Makers BP-19B6S

• Manufacturer: Kingann

Forging stations : 6, Fingers’ number : 7, Max. Diameter of wire : 23 mm, Production ppm: 90 max, Max. Diam. Screw : m18 x 110 iso 4014; Max open upset : 37 mm Max/min length of cutoff : 15/165 mm, Dies di...

Header Progressive Bolt Maker National M34 S1

• Manufacturer: National

Double blow header Diameter range : 4 mm, Shaft length under head :25 mm, Max. cutting length : 32 mm, Output- piece/min : 350, Weight : 1570 kg, Motor power : 4 kW, Measurements : 200 x 80 x 160 mm,