1980 NICHT BEKANNT 23N/8
- Manufacturer: NICHT BEKANNT
Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...
Leipzig, Germany
1993 TRANSFLUID DB618
- Manufacturer: Transfluid
Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single...
Leipzig, Germany
1988 WMW -
- Manufacturer: WMW
- Power requirement: 0.25 kilowatt
-application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...
Leipzig, Germany
1995 L.A.S.A. RH 16-200
- Manufacturer: L.A.S.A.
- Power requirement: 5.5 kilowatt
description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and g...
Leipzig, Germany
2006 Schilt Engineering BV SBC 60 SP (PLC)
- Manufacturer: Schilt Engineering BV
Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control...
Leipzig, Germany
1985 GOTI S.A. CE 200 TN
- Manufacturer: GOTI S.A.
- Power requirement: 1.5 kilowatt
description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable
Leipzig, Germany
1974 RASTER HR 30 SL
- Manufacturer: Raster
- Model: HR 30 SL
- Power requirement: 7.5 kilowatt
Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm
Leipzig, Germany
1990 WANZKE SP S 63
- Manufacturer: WANZKE
- Power requirement: 30 kilowatt
Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-ro...
Leipzig, Germany
1990 ANTRIM HYDRAULICS Embosing Press
- Manufacturer: ANTRIM HYDRAULICS
- Power requirement: 12 kilowatt
Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x3...
Leipzig, Germany
Tip: Enter manufacturer, model or keyword