Used Processing in Hamburg, Germany

Friedrich Goldmann Goden Gate 9635
- Manufacturer: Friedrich Goldmann
Bridge saw for natural stone Including saw blade set with diameters of 350-1,000 mm 2 peripheral milling cutters Including rotary table The required concrete foundations are not included in the offer. More used m...
Hamburg, Germany
2005 Dr. Kronenberger -
- Manufacturer: Dr. Kronenberger
Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...
Hamburg, Germany
2017 INTERMAC Master 45-
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2003 Montresor LOLA 1000
- Manufacturer: Montresor
- Model: Lola 1000
Edge grinder for straight edges Grinding and polishing of straight edges with upper and lower chamfers, Calibration 8 heads for straight polishing 3 upper and 3 lower spindles for chamfering Water drop unit The m...
Hamburg, Germany
1995 Levi Tunisi LT 1204-
- Manufacturer: Levi Tunisi
- Model: LT
Block cutter for marble complete with unloading and cross cutter (crosscut saw) Saw blade 1,550 mm Motor 150 hp Complete with trolley, unloading and crosscut saw Voltage V. 380 Hz 50 More used machines at: www.ja...
Hamburg, Germany
2010 Prussiani Champion 60-
- Manufacturer: Prussiani
- Model: Champion
CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...
Hamburg, Germany
1997 Pedrini M 589 GR-
- Manufacturer: Pedrini
Block cutter Engine, rated power – 210 kW. 56 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1300 mm Shaft D: 180 mm; shaft length: 1000 mm Diameter of the horizontal cutting disc – ...
Hamburg, Germany
1992 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
1995 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
1998 Pellegrini DF2000-
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw for marble and granite. Dimensions: 10 x 1.5 x h6 m Maximum block size: 4.1 x 2.2 m Diamond wire length: 19.70/21.70 m Diamond wire speed: 0-40 m/s More used machines at: www.janssen-usedmachines.com New...
Hamburg, Germany
2004 GMM Lexta 36 FULL
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Max. saw blade diameter: 825 mm Optional: Automatic table, swivel head, frequency converter for motor pulley The frequency converter pulley, display, and motor pulley were replaced in November 2024. Vo...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany