Building Filters

Salt Spray Testing Chamber Manufacturer For Electronic And Electrical Parts from LISUN cyclic corrosion chamber
- Manufacturer: Lisun
Please contact us first before you place order. Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection laye...
Shanghai, China
Testing Machine Salt Spray Environmental Test Chamber LISUN YWX/Q-010 For Electronic And Electrical Parts
- Manufacturer: Lisun
Please contact us first before you place order. Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection laye...
Shanghai, China
CZKS-3 Three Position Plug Socket Switch Life Tester
- Manufacturer: Lisun
The CZKS-3 Six Positions Plug Socket Switch Life Tester is according to the IEC 60884-1:2022 Clause 20 and 21 (GB/T 2099.1-2021 Clause 20 and 21), IEC 60669-1:2017 Clause 18 and 19 (GB/T 16915.1-2024 Clause 18 an...
Shanghai, China
LS-B07 Retention Tensile Force Test Device for Soft Cable
- Manufacturer: Lisun
The LS-B07 Retention Tensile Force Test Device for Flexible Cables is designed and manufactured in full accordance with the requirements of IEC 60884-1:2022 Clause 23.2 Figure 27, and EN 50075:1990 Clause 12.2 an...
Shanghai, China
LS-B10 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pins
- Manufacturer: Lisun
LS-B10 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pins fully meet IEC 60884-1:2022 Clause 24.8 Figure 31 and BS 1363-1:2023 Clause 13.17.3 Figure 9 (GB/T 2099.1-2021 Clause 24.8 and Figure 28) rela...
Shanghai, China
DFX-20 Externally Ballasted Fluorescent Lamp Test Load Cabinet
- Manufacturer: Lisun
The DFX-20 Externally Ballasted Lamp Test Load Cabinet (Resistive, Inductive, and Capacitive Load cabinet) is designed and manufactured according to standards such as IEC 60669-1:2017 Clause 18.2, Clause 19.1 and...
Shanghai, China
LS-B17 Insulating Sleeves of Plug Pins Abnormal Heat Resistance Test Device
- Manufacturer: Lisun
The LS-B17 Insulating Sleeves of Plug Pins Abnormal Heat Resistance Test Device fully meets IEC 60884-1:2022 Clause 28.1.3 Figure 43 (GB/T 2099.1-2021 Clause 28.1.3 and Figure 40). Applicable to abnormal heat res...
Shanghai, China
WDT-1 Wire Damaged Tester
- Manufacturer: Lisun
WDT-1 Wire Strength Damaged Tester is designed and manufactured according to corresponding regulation in standard IEC 60884-1:2022 Clause 12.2.5 and Figure 11 (GB/T 2099.1-2021 Clause 12.2.5 and Figure 11), IEC 6...
Shanghai, China
BCL-1 Resistance to Lateral Strain, Maximum and Minimum Pull-out Force Test Device
- Manufacturer: Lisun
The BCL-1 fully complies with IEC 60884-1:2022 Clause 13.14, Figure 16, Clause 22.2, Figure 25; and Clause 22.2.2, Figure 26 (GB/T 2099.1-2021). It is used to check the maximum force required to pull a plug out o...
Shanghai, China
SSBL-3P20A Test for Switches Intended for Self-ballasted Loads
- Manufacturer: Lisun
The SBLL-3P20A is used to test the load on-off capability of the self-ballasted lamp switch. Check whether the switch has continuous arc flash, whether the contacts are welded, whether there are long-term contact...
Shanghai, China
WS-1 Temperature Rise Tester
- Manufacturer: Lisun
The WS-1 Temperature Rise Tester fully complies with the requirements of IEC 60884-1:2022 Clause 19 (GB/T 2099.1-2021 Clause 19), IEC 60669-1:2017 Clause 17 (GB 16915.1-2024 Clasue 17) and IEC 60998-1:2002 Clause...
Shanghai, China
DWC-1 Low-temperature impact device
- Manufacturer: Lisun
The DWC-1 Low-temperature Impact Test Device is according to IEC 60884-1:2022 Clause 24.5 Figure 30 and Clause 30.5 Figure 42 (GB/T 2099.1-2021 Clause 24.5 Figure 27 and Clause 30.5 Figure 42 ), IEC 60670-1 Figur...
Shanghai, China
SW-6 Power Cord Bending Tester
- Manufacturer: Lisun
The SW-6 Power Cord Flexibility Bending Tester is according to IEC 60884-1: 2022 Clause 23.4 and Figure 28 (GB/T 2099.1-2021 Clause 23.4), IEC 60745-1: 2008 Clause 24.12 and Figure 9 (GB 3883.1-2014 Clause 24.12)...
Shanghai, China
