SHARP M24-SERIES in Port Orange, FL, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Capacity
- Swing over bed; 40 in. (1,016 mm)
- Swing over cross slide
- 27.95 in. (709.93 mm)
- Swing over gap
- 57.09 in. (1450.08 mm)
- Distance between centers
- 160 in. (4,064 mm); 200 in. (5,080 mm); 240 in. (6,096 mm)
- Headstock
- Spindle Speed; —
- No. of spindle speeds
- —
- Spindle nose
- —
- Spindle bore
- 6" standard, 9", 12", 15", optional
- Threads & feeds
- Inch Threads, Number; 0.25-30 tpi, 70
- Metric threads, number
- 1-120 mm, 62
- Modular threads, number
- 0.25-30 M.P., 53
- Diametral pitch threads, number
- 1-120 D.P., 70
- Longitudinal feeds
- 0.0024-0.28 in/rev (0.0609-7.11 mm/rev)
- Cross feeds
- 0.0012-0.14 in/rev (0.0304-3.55 mm/rev)
- Leadscrew pitch, diameter
- 2 tpi, 2.36 in.
- Carriage
- Cross slide travel; 23.6 in. (599.4 mm)
- Compound travel
- 14.57 in. (370.07 mm)
- Compound width
- 31.5 in. (800.1 mm)
- Bed
- Bed Length; 232 in. (5,892.8 mm); 272 in. (6, 908.8 mm); 311 in. (7,899.4 mm)
- Bed width
- 24"
- Tailstock
- Quill Diameter; 4.53 in. (115.06 mm)
- Quill travel
- 12 in. (304.8 mm)
- Quill center taper
- MT #6
- General
- Spindle Motor; 30 HP (22.37 Kw)
- Voltage
- 220V/440V
- Phase
- 3-Phase
- Approximate weight
- 22,660 lbs. (10,278 Kg); 24,860 lbs. (11,276 Kg); 27,060 lbs. (12,274 Kg)
- Dimensions
- 186.6x6.72x4.89 ft (56.8x2.04x1.49M); 23.29x6.72x4.89 ft. (7.09x2.04x1.49M); 26.5x6.75x4.91 ft. (8.07x2.05x1.49M)
- Lathe size
- 40" x 60"+
- Lathe type
- Large Spindle Bore
- Machine sub-category
- Large Spindle Bore
- Swing over bedways
- 40", 50", 60", 70", 80"
- Bet centers
- 60" – 315"
- Spindle motor
- 30 HP, larger HP available
- Item
- 40" x 60" - 240" Heavy Duty Big Bore Lathes
- Category
- Lathes in USA
- Subcategory
- Sharp lathes
- Listing ID
- 97882320
Description
SHARP 40" x 60" - 240" M24-Series Heavy Duty Big Bore Lathes
The big bore lathe is ideal for large pipe works in oil fields and big valves works. This series offers spindle bores up to 15” , center distance range from 60” to 315”. The machine bed is 24” wide. Double chucks are available for holding extra long and large work pieces.
Massive one- piece casting machine base
Three points support headstock spindle:
The headstock casting is designed with one ball bearing and two tapered roller bearings supporting the full length of the spindle shaft.
Spindle bore sizes are available in 6”, 9” and 12” , 15”
Gears and shafts are made from hardened and ground alloy steel, the spindle is made from forged, chrome alloy material.
Solid one piece casting base:
The one piece casting bed is fully ribbed to prevent distortion under heavy cutting conditions. The base casting of the headstock is ribbed to withstand stress and distortion due to heavy machining conditions