MTC-1 Miniature Temperature Controller in Shanghai, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Product description
- The MTC-1 Miniature Temperature Controller utilizes a highly accurate and stable platinum RTD as a feedback sensor that will display and maintain the set temperature at ±0.1 degrees Celsius, with an easily adjustable set point.
- Accuracy
- ; ±1°C
- Resolution
- ; ±0.1°C
- Coverage
- ; Ambient temperature to 99.9°C
- Displayed value reading
- ; 0.5" LCD backplane
- Maximum dc power output resistive load
- ; 90 watts
- Dc output ratings
- 6V min. 24V max. 4 amps DC
- Ac ground leakage current
- ; less than 1 mA to 110 V AC
- Size
- ; 5 1/2" L x 2" W x 1" D
- Weight
- ; (including power unit) 1 lb.
- Power supply
- 110V - 230 V AC Input 12V 4 Amp DC Output
- Category
- Temperature Controllers in China
- Subcategory
- Physitemp, usa
- Subcategory 2
- Import agent series
- Listing ID
- 86982210
Description
Specification:
The current focus is on keeping small to medium sized samples at physiological temperatures using simple, low cost temperature controllers, which is where the Physitemp mtc-1 was developed.
Miniature Temperature Controller
of the reason. Utilizing a highly accurate and stable platinum RTD as a feedback sensor, this inexpensive controller will display and maintain a set temperature of ±0.1 degrees Celsius. The controller operates from a 12VDC supply and controls up to 4 amps (50 watts) of output current. It can also input voltages between 6 and 24VDC for lower and higher power (up to 90 watts.) The 1/2 inch LCD backlit readout guarantees continuous temperature display resolution of 0.1 degrees. The set point is easily adjusted from just above room temperature to 99.9 degrees Celsius, which can be done with a 20 turn potentiometer. A momentary switch allows the user to toggle the display between setup and running temperatures.