GMC GML-1660HD 16 x 60 in Metal Lathe with 2-Axis DRO (220V ONLY / 3PH) in Dover, DE, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- GML-1660HD
- Shipping
- Free Shipping
- Free shipping
- Yes
- Max. swing over bed
- 16 1/16"
- Max. length of workpiece
- 60"
- Max. swing over cross slide
- 10 1/4"
- Max. swing in gap
- 23 1/4"
- Width of bed
- 10 1/4"
- Effective length in gap to spindle
- 8 1/2"
- Effective length in gap to chuck jaws
- 3 1/2"
- Spindle bore
- 2 1/16" D1-6
- Taper of spindle center
- M.T. #6 (MT6/MT4 sleeve)
- Spindle speeds
- 45-1,800 rpm / 16 steps
- Longitudinal feeds
- 0.0018-0.07 IPR, 42 kinds
- Cross feeds
- 0.0009-0.03 IPR, 42 kinds
- Inch threads
- 70-2 TPI, 45 kinds
- Metric threads
- 0.2-14 mm , 39 kinds
- Diametral pitch threads
- 8-40 DP , 21 kinds
- Module threads
- 0.3-3.6 mm, 18 kinds
- Max. travel of top slide
- 4 1/4"
- Max. travel of cross slide
- 8 1/2"
- Spindle length w/o chuck leadscrew length x tpi
- 20 1/2" 1 1/4" x 4 TPI
- Diameter of tailstock quill
- 2 1/16"
- Max. travel of tailstock quill
- 5"
- Taper of tailstock quill center
- MT4
- Main motor
- 6 HP, 220V/20A, 3 Phase
- Coolant pump
- 1/8 HP, 220V, 3 Phase
- Net weight
- 4,850 lbs.
- Overall dimensions (l x w x h)
- 100" x 32.2" x 56"
- Category
- Heavy Duty Lathes in USA
- Subcategory
- Lathes
- Subcategory 2
- Metalworking
- Listing ID
- 85705577
Description
GMC GML-1660HD 16 x 60 in Metal Lathe with 2-Axis DRO (220V ONLY / 3PH)
Features
ISO 9001 certified.
Large spindle bore 2-1/16”
Heavy Duty spindle D1-6
One-piece solid cast iron machine base.
Heavy Duty guideway width 10-1/4”
Heavy Duty main motor 6 HP.
16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800 rpm
45 kinds of inch threads, and 39 kinds of metric threads.
Threading and feeding rate change without changing gears.
Spindle is balanced, hardened and precision ground.
Spindle is supported at 3-point by high precision bearings.
All gears and shafts are hardened and precision ground.
Guideways induction hardened and precision ground.
Automatic lubrication system in headstock and feed box.
Specifications
Standard Equipment
SINO DRO (installed).
Taper turning attachment (installed).
8” 3-jaw chuck with one set of reversible jaws.
10” 4-jaw chuck.
12” Face plate.
5 1/2” large steady rest with roller jaws (bearings).
$15,850 USD