Superimposed Force Standard MachineThe measurement and measurement of the standard force gauge, the measurement of the load cell and the load cell (non-linearity, repeatability, sensitivity, etc.). in Jinan, Shandong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Test force range
- 10kN ~ 50MN
- Test force measurement range
- 2%-100% F.S
- Force value error (in, return)
- Within the range of 2%-10%F.S, the test data is better than ±0.03%;
- Force value repeatability
- Within the range of 2%-10%F.S, the test data is better than 0.03%;
- Initial load discrimination
- 10% FS, better than 0.01%
- Load volatility
- Within the range of 2%-10% F.S, the test data is better than 0.01%;
- Azimuth error
- Within the range of 2%-10%F.S, the test data is better than 0.06%;
- Test space (length x width x height)
- 1MN (600 X 600 X 800mm)
- Category
- Feedback Devices in China
- Subcategory
- Machinery
- Listing ID
- 84807131
Description
Product Application
The measurement and measurement of the standard force gauge, the measurement of the load cell and the load cell (non-linearity, repeatability, sensitivity, etc.).
Specifications
1. The first special design: the point of application is at the top of the whole machine
Top-mounted plunger cylinder, top-mounted sensor. The weight of the reaction frame falls on the sensor. It is ensured that the force axis of the standard machine is always coaxial with the gravity axis.
2. The second special design: no-back reaction frame.
The piston lifts and adjusts the tension and compression space, and there is no change in the force reference.
3. The third special design: square reaction frame.
The base and the beam adopt an integral square structure, which eliminates the inconsistency between the 0° and 180° directions and the 90° and 270° directions.
4. The fourth special design: a single sensor force measurement.
German HBM high-precision (00 C18, better than 0.