DMG MORI DECKEL MAHO DMU80P hi-dyn in Germantown, WI, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Year
- 2002
- Stock number
- 064329
- Status
- Available
- Number of axis
- 5-Axis
- Tool changer
- 60 ATC
- Control
- HH MillPlus IT
- Spindle
- 18,000 rpm
- Spindle taper
- CAT 40
- X axis
- 31.5" (800 mm)
- Y axis
- 27.6" (700 mm)
- B axis
- -7.3 to +187.6 degrees
- Z axis
- 23.6" (600 mm)
- C axis
- 360 x 0.001 degrees
- Build date
- 08/2001 in Germany
- First installed new in the usa
- 02/2002
- X-axis (longitudinal)
- 31.5" (800 mm)
- Y-axis (transverse)
- 27.6" (700 mm)
- Z-axis (vertical)
- 23.6" (600 mm)
- Maximum workpiece diameter
- 36.2" (920 mm)
- Maximum workpiece height
- 39.4" (1,000 mm)
- Maximum workpiece weight
- 1,760 lbs (800 kg)
- Maximum table load
- 1,760 lbs (800 kg)
- Rotation range
- 360 x 0.001 degrees (Full 4th Axis)
- T-slots
- 9, 14 H7/63 mm/0.55 H7/2.4
- Type
- Brushless AC/Digital
- Power 40% duty cycle (s3)
- 37.5 hp (28 kW)
- Power 100% duty cycle (s1)
- 25.5 hp (19 kW)
- Number of gear steps
- None
- Maximum spindle torque
- 89 ft/lb (121 Nm)
- Spindle bearing diameter front
- 3.15" (80 mm)
- Automatic swivel horiz/vert
- Approximately 4 seconds
- Retention knob
- ISO/DIS 7388/II type B
- Feed rate
- 0.04"-590 IPM (1-15,000 mm/min)
- Rapid feed (x/y/z)
- 1,575 IPM (40 m/min)
- Acceleration
- 5 m/s-2
- Feed power (x/y/z)
- 10 kN
- Ballscrew (x/y/z)
- 40x20/40x20/40x20 mm
- Magazine type
- Horizontal chain, double gripper
- Number of pockets
- 60
- Maximum tool weight
- 22 lb (10 kg)
- Maximum tool diameter with empty neighboring pockets
- 6.3" (160 mm)
- Maximum tool length
- 13.8" (350 mm)
- Tool change time
- Approximately 5.5 seconds
- External coolant jets pressure
- 21.7 PSI (1.5 bar)
- External coolant jets flow rate
- 10.6 gpm (40 l/min)
- Chip conveyor pump output pressure
- 21.7 PSI (1.5 bar)
- Chip conveyor pump output flow rate
- 15.8 gpm (60 l/min)
- Coolant tank capacity
- 160 gallon (600 l)
- Pump output
- 6 gpm (23 l/min)
- Pump pressure
- 580 PSI (40 bar)
- Compressed air
- 87 PSI (6 bar)
- Input resolution
- 0.001 mm
- Category
- Machining Centers in USA
- Subcategory
- 5-axis machining centers
- Listing ID
- 83657357
Description
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU80P hi-dyn
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2002 DMG MORI DECKEL MAHO DMU80P hi-dyn 5-AXIS Universal Machining Center:
Machine is IN STOCK, fly into Milwaukee, WI (MKE) to inspect
>>**This machine is bank owned, they are OPEN FOR OFFERS**<<
This machine was made at DMG MORI-Pfronten in Pfronten, Germany
-DESIGN CONCEPT-
This machine is TWO machines in one because of the universal milling head
that swivels from horizontal to vertical position and vice versa. This
allows complete machining in one set-up for up to 5-sides and 5-axes
machining.
-CONTROL-
HEIDENHAIN MillPlus IT with Ethernet & Electronic Handwheel
-WORKING RANGE-
-MAXIMUM WORKPIECE DIMENSIONS-
-4th AXIS NC ROTARY TABLE-
Clamping surface 35.4" dia x 24.8" (900mm diameter x 630mm front to back)
-5th AXIS UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS-
This machine is equipped with a universal milling head that swivels from
horizontal to vertical position and vice versa. In addition the milling
head has a controlled B-Axis. Swivel angle from vertical position 0 deg
to the left -7.3 degrees(in direction of tool magazine)and to the right to
horizontal position +180.3 degrees for a total 187.6 degrees swivel range.
This allows complete machining in one set-up for up to 5-sides and 5-axes
machining.
-MAIN SPINDLE DRIVE-
Spindle speed range 20-18,000 rpm motor spindle
-FEED DRIVES-
-60 POSITION TOOL CHANGER-
Maximum tool diameter with no empty neighboring pockets 3.94" (100 mm)
-EXTERNAL FLOOD COOLANT-
-COOLANT THRU THE SPINDLE-
-INSTALLATION-
Total weight of machine at base incl. workpiece weight 21,605 lb(9,800 kg)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
-EQUIPPED WITH-
Fully enclosed protection cabin
BLUM Laser tool measuring in machining area:
Automatic withdrawal of the measuring unit in a protected housing
Tool length & tool diameter measuring in both horizontal/vertical
Preparation for Renishaw MP 10 infrared measuring probe
Spray pistol with pump 14.5 psi/10.4 gpm (1 bar/40 l/min)
Production package consisting of:
-Coolant tank 160 gallon (600 l) with automatic gap sieve cleaning
-580 PSI (40 bar) coolant thru the spindle form AD
-Chip conveyor
-Rotating clear-view window on side window