DMG MORI DECKEL MAHO DMU 80P hi-dyn in Germantown, WI, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Year
- 2005
- Stock number
- 064227
- Status
- Available
- Number of axis
- Full 5-Axis
- Tool changer
- 30 ATC
- Control
- MillPlus IT
- Spindle
- 6,300 rpm
- Spindle taper
- CAT 50
- X axis
- 31.5" (800 mm)
- A axis
- -45 to +30 degrees
- Y axis
- 27.6" (700 mm)
- Z axis
- 23.6" (600 mm)
- C axis
- 360 x 0.001 degrees
- X axis (longitudinal)
- 31.5" (800 mm)
- Y axis (transverse)
- 27.6" (700 mm)
- Z axis (vertical)
- 23.6" (600 mm)
- Clamping surface
- 24.8" diameter (630 mm)
- Maximum table load
- 1,320 lbs (600 kg)
- Rapid speed rotary axis
- 9.3 rpm
- Rapid speed swivel axis
- 7.3 rpm
- Rotation range
- 360 x 0.001 degree (Full 4th axis)
- Type
- Brushless AC/Digital
- Power 40% duty cycle (s3)
- 21.5 hp (16 kW)
- Power 100% duty cycle (s1)
- 17.5 hp (13 kW)
- Spindle speed range
- 20-6,300 rpm with gearbox
- Maximum spindle torque
- 350 ft/lbs (475 Nm)
- Spindle bearing diameter front/rear
- 3.94"/2.76" (100/70 mm)
- Clamping power
- 20 kN
- Feed rate (x-y-z)
- 2,362 ipm (60 m/min)
- Rapid feed (x-y-z)
- 197 ft/min (60 m/min)
- Feed power (x-y-z)
- 10 kN
- Ballscrew thread x/y/z
- 40x20 mm
- Magazine type
- Chain, horizontal, double gripper
- Number of pockets
- 30
- Maximum tool weight
- 44 lbs (20 kg)
- Maximum tool diameter with neighbouring empty pockets
- 9.05" (230 mm)
- Maximum tool length
- 13.8" (350 mm)
- Tool change time
- Approximately 6.5 seconds
- Input resolution
- 0.001 mm
- Coolant tank capacity
- 158 gallon (600 l)
- Pump output thru the spindle
- 6 gallon/minute (23 l/min)
- Coolant pressure
- 580 PSI (40 bar)
- Category
- Machining Centers in USA
- Subcategory
- 5-axis machining centers
- Listing ID
- 83657340
Description
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 80P hi-dyn
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
2005 DMG MORI DECKEL MAHO DMU80P hi-dyn 5Axis Universal Machining Center:
*May be inspected in plant under power by appointment*
HEIDENHAIN MillPlus IT CNC Control with electronic handwheel & Ethernet
-DESIGN CONCEPT-
This is a UNIVERSAL machining center meaning it is two machines in one:
both a vertical AND horizontal machining center. The universal milling
head on this machine is automatic and programmable. It can be swivelled in
6 seconds from vertical to horizontal, and in combination with the rotary
swivel table makes 5-sided 5-axis machining in a single set up possible.
Setup time is reduced, the need for multiple setups is eliminated and
accuracy and precision are improved. The P Series machines are intended
for fully automatic manufacturing of highly complex workpieces in a single
set up. Ideal for both small and large batches with the high production
components including high pressure CTS (Coolant Thru The Spindle) and
chip conveyor.
-WORKING RANGE-
Maximum part size 31.5" (800 mm) diameter x 23.6" (600 mm) high x 1,323lbs
-NC SWIVEL ROTARY TABLE-
Swivel angles To spindle -45 degrees, from working spindle +30 degrees
-AUTOMATIC UNIVERSAL MILLING HEAD-
Automatic swivel from horizontal to vertical in approximately 6 seconds.
The auto swivel head makes this machine 2 machines in one because both
vertical and horizontal machining is possible with one workpiece clamping.
Together with the NC Swivel Rotary table 5-Sided, 5-Axis simultaneous
machining is possible with one workpiece clamping.
-GEARED SPINDLE-
Number of gear steps 2, acceleration/deceleration from 20-6,300 rpm 3 sec
-FEED DRIVES-
-30 POSITION TOOL CHANGER-
Maximum tool diameter with no neighbouring empty pockets 4.33" (110 mm)
Chip-to-chip time CAT40 Approximately 16 seconds vertical, 7.5 sec horiz
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
-EXTERNAL FLOOD COOLANT PUMP ON OUTSIDE OF SPINDLE-
Pump output external jets flow rate 10.6 gallon/minute (40 l/min), 1.5 bar
-INTERNAL HIGH PRESSURE COOLANT SUPPLY THRU THE SPINDLE (40 BAR CTS)-
-EQUIPPED WITH-
Fully enclosed protection cabin
Chip conveyor
BLUM Laser Tool Measuring of tool length and diameter
RENISHAW MP10 infrared parts measuring touch probe
Auto swivel milling head that swivels from vertical-horizontal & viceversa
Tool breakage monitoring
Original machine parameters on CD, diskette and paper print out
Original accuracy test chart from the factory in Germany
Electrical schematics, operator manual, programming manual