DECKEL MAHO DMG-DMC64V in Germantown, WI, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Year
- 2005
- Stock number
- 064169
- Status
- Available
- Number of axis
- 3-Axis
- Tool changer
- 30 ATC
- Control
- HH TNC 530
- Spindle
- 12,000 rpm
- Spindle taper
- CAT 40
- X axis
- 25.2" (640 mm)
- Y axis
- 23.6" (600 mm)
- Z axis
- 19.7" (500 mm)
- Feed force x/y/z
- 7,000 N
- Feed rate
- 0.04-1,575 ipm (1-40,000 mm/min)
- Rapid traverse x/y,z
- 2,755 ipm (70 m/min) No ballscrew in X-Axis
- Rapid traverse y-axis
- 1,575 ipm (40 m/min)
- Rapid traverse z-axis
- 1,575 ipm (40 m/min)
- Ball screw diameter/pitch (y/z)
- 1.57/0.6" (40/15 mm)
- X-axis
- 5 m/s-2
- Y-axis
- 4 m/s-2
- Z-axis
- 5 m/s-2
- Direct
- 0.001 mm
- Speed range
- 1-12,000 rpm
- Drive power 40% dc/continous duty
- 25.5/17.4 hp (19/13 kW)
- Torque 40% dc/continous duty
- 73/51.1 ft/lbs (100/70 Nm)
- Tool mounting din 69 871-a
- CAT 40
- Tool clamping force
- 8,000 N
- Tool releasing force
- 13,000 N
- Acceleration 0-12,000 rpm
- 2.3 seconds
- Deceleration 12,000 rpm-0
- 1.4 seconds
- Number of tools
- 30
- Maximum tool diameter
- 3.9" (100 mm)
- Maximum tool diameter, vacant adjacent places
- 5.5" (140 mm)
- Maximum tool length
- 11.8" (300 mm)
- Maximum tool weight
- 15.4 lbs (7 kg)
- Maximum loading weight of tool magazine
- 198 lbs (90 kg)
- Chip to chip time
- Approximately 7 seconds
- Loading height (upper edge of table)
- 33.5" (850 mm)
- Maximum work load capacity
- 1,320 lbs (600 kg)
- Category
- Machining Centers in USA
- Subcategory
- Vertical machining centers
- Listing ID
- 83657302
Description
VERTICAL MACHINING CENTERS
DMG-DMC64V
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2005 DECKEL MAHO DMG-DMC64V 3-Axis Vertical Machining Center:
Machine made in Geretsried, Germany, inspect under power in Wisconsin!
HEIDENHAIN iTNC530 Control with Ethernet & Electronic Handwheel
-HIGHLIGHTS-
30 position pick-up tool changer which can be loaded during machining time
Tool changer is located behind working area to protect from emulsion &dirt
Direct measuring system (Heidenhain glass scales) for maximum accuracy
15" TFT flat screen on HEIDENHAIN iTNC530 Control
-WORKING RANGE-
-FEED-
-ACCELERATION-
-POSITIONING ACCURACY (ADMISSIBLE VALUE ACCORDING TO VDI/DGQ 3441)
P: Y,Z-axis (direct measuring system) acc. VDI/DGQ 3441 0.0004" (0.010 mm)
P: X-axis (direct measuring system) acc. VDI/DGQ 3441 0.0003" (0.008 mm)
-HEIDENHAIN GLASS SCALES X/Y/Z PATH MEASURING SYSTEM (RESOLUTION)-
-MAIN SPINDLE-
-PICK-UP TOOL MAGAZINE/CHANGER-
-TABLE DESIGN-
Clamping area with T-slots DIN 650-14.. 33.5" x 23.6" (850 mm x 600 mm)
-EQUIPPED WITH-
HEIDENHAIN iTNC530 CNC Control with 15" TFT flat screen monitor
Spray gun
Fully enclosed work cabin
Machine will come with a miscellaneous assortment of CAT 40 tool holders
Price quoted in US Dollars
APPROXIMATE WEIGHT 17637#