Cat C32 Generator Set (IMO III) in Mesa, AZ, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Minimum rating
- 219 ekW
- Maximum rating
- 940 ekW
- Frequency
- 60hz
- Configuration
- Vee-12, 4-stroke-Cycle-Diesel
- Aspiration
- Turbocharged-aftercooled aspiration
- Bore
- 5.71 in
- Stroke
- 6.38 in
- Displacement
- 1,959 in³
- Emissions
- IMO III emissions certified (SCR required)
- Oil change interval
- 750 hrs
- Refill capacity
- Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Rated engine speed
- 1500 rpm
- Cooling
- Heat exchanger, keel or radiator cooled
- Generator
- SR5 - Form Wound
- Governor
- Electronic (A5 ECM)
- Length
- 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
- Width
- 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
- Height
- 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
- Package dry weight
- 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
- Category
- Generator Sets in Arizona
- Subcategory
- Marine generator sets
- Listing ID
- 82813503
Description
Separate circuit aftercooled (SCAC)
Closed crankcase fumes disposal
24V control system
Heat exchanger or Keel Cooling
Watercooled exhaust manifold and turbocharger
Hard seawater lines – no flexible hoses
Flanges for cooling connections, ANSI or DIN
Primary fuel filter with water separator installed on base frame
Duplex fuel filters with hybrid fuel lines
IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
Oil fill, simplex filter and dipstick
Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
Right or left hand service sides
Customer wiring and service tool connector
MGCPIIIB control panel with Cat® Alarm and Protection System
IP44 generator protection
Muffler
Water-in-fuel and exhaust temperature sensors
SOLAS approved spray shielding
Charging alternator
Manual or electric fuel priming pump
Fuel cooler
Duplex oil filters
Starting motors – air, electric or redundant