Nanbei 40L Massive Solvent Recycling Machine in Zhengzhou, Henan, China

It is suitable for recovering clean organic solvents from the waste solutions produced by organic solvent cleaning, such as: solutions produced by cleaning spray guns in the spraying industry; trichloroethylene solutions and toluene solutions for cleaning electronic products; IPA and anhydrous ethanol for cleaning optical lenses; printing The industry's Tianna water cleaning solution, etc. It can be simply classified as follows:

1 . Aromatic hydrocarbons: toluene, xylene, trimethylbenzene, etc.;

2 . Aliphatic hydrocarbons: pentane, hexane, octane, etc.;

3. Alicyclic hydrocarbons: cyclohexane, cyclohexanone, toluene cyclohexanone, etc.;

4. Halogenated hydrocarbons: chlorobenzene, dichlorobenzene, dichloromethane, trichloroethylene, etc.;

5. Alcohols: methanol, ethanol, isopropanol, etc.;

6. Ethers: diethyl ether, propylene oxide, etc.;

7. Esters: methyl acetate, ethyl acetate, n-butyl acetate, etc.;

8 . Ketones: acetone, methyl ethyl ketone, methyl isobutyl ketone, etc.;

9 . and other organic solvents not listed.

Types of solutions/solvents not suitable for recycling

1 . Dangerous goods solvents such as nitrocellulose (nitro) and oxidants;2. Strong acid or strong alkaline solvent;

3. Highly toxic solvent;

4. Strong corrosive solvents for stainless steel or copper

pipes, etc.

Product Feature

1. The whole machine and components adopt explosion-proof safety design:

○All electric control systems and components are explosion-proof structures, explosion-proof electric control systems are made of cast aluminum material, fully sealed explosion-proof design, to prevent contact between sparks and solvents;

○The temperature display has no electrical contacts and will not produce sparks;

○All cable joints are fully explosion-proof and sealed, using stainless steel hoses as protective materials, which will not be corroded and ensure safety;

○The recycling bucket is made of stainless steel, double-layer structure, indirect heating, reinforced bucket cover design, precise temperature control, explosion-proof, anti-leakage.

2 . Set temperature shutdown function:

Set the shutdown temperature controller, and set a temperature as the shutdown temperature. When the recovery is completed, the solvent vapor in the steam pipe will gradually decrease, and the scale of the steam thermometer will gradually decrease, triggering the shutdown system, and the machine will automatically shut down.

◆ This function stops the machine completely and acts as a complete shutdown.

3. Timer shutdown function:

The recovery time of the machine is pre-set, and the machine will automatically stop when the running time of the machine reaches the preset time. With this function, the recovery time can be appropriately shortened to ensure that a little solution is reserved in the recovery bucket when the recovery is completed to make the residue liquid, which is convenient for cleaning and can effectively prevent drying out or gas explosion.

◆This timing protection system only stops the heating system.

4. Double ultra-high temperature protection function:

Built-in dual heating high temperature protection function, when the temperature of the heating medium oil reaches the preset maximum temperature, the high temperature protection red light is on, and the heater stops heating. This function ensures the safe operation of the machine within the set temperature range and effectively prevents the heating temperature from being too high.

5. Ultra-high voltage protection function:

If the pipeline is blocked, the steam will not be discharged through the steam pipeline, and the pressure in the barrel will rise, exceeding the external pressure by 0.38Bar, and the safety valve on the barrel lid will automatically open to relieve the pressure to ensure the safety of equipment and operators.